User manual SONY CDX-GT457UE

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] Tip If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) for two seconds until the desired frequency appears (manual tuning). If you want to put a blank space between characters, select "_" (underbar). Press (SHIFT), then press (3) (PLAY MODE) repeatedly until "MONO" appears. 3 Repeat steps 1 and 2 to enter the entire name. To return to the normal radio reception, press (LIST) for two seconds. To go back to the normal mode, select "MONO-OFF" in step 2 above. Tip To erase/correct a name, enter "_" (under-bar) for each character. Each time you press (DSPL), the item alternates between the frequency and the clock. Each source can store the bass and treble levels independantly. Each time you press (DSPL), the item changes as follows: Tune in any station and press (LIST) for two seconds. Repeat steps 3 and 4 if you want to erase other names. During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. *2 If the track name of an MD is not prerecorded, "NO NAME" appears in the display. *3 If the dual information function is on , the clock does not appear in the display. Tip If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then (1) (N). The disc name appears when the disc has changed (if the disc name is selected). â· The track name appears when the track has changed (if the track name is selected). â· The disc or track name appears depending on the setting when you press (SOURCE) to select an MD. You can play the first 10 seconds of all the tracks on the currently selected disc. Playing tracks in random order -- Shuffle Play During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "INTRO" appears. To go back to the normal playback mode, select "INTRO-OFF" in step 2 above. [. . . ] In this case, remove the disc and wait for about an hour until the moisture evaporates. Use the optional Sony compact disc single adapter (CSA-8) to protect the CD player from being damaged. A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. [. . . ]