User manual SONY CDX-GT470UM

[. . . ] 4-427-110-11(1) FM/AM Compact Disc Player Operating Instructions GB Mode d’emploi FR Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. To cancel the demonstration (DEMO) display, see page 5. [. . . ] Rotate the control dial to adjust the listening position, then press it. adjustable range: “+3” – “CENTER” – “–3. € Press (BACK) to return to the previous display. You can also set the approximate subwoofer position from your listening position if: – the audio output is set to “SUB-OUT” (page 16). € the listening position is set to other than “OFF. € The options for “SET SW POS” are indicated below. NEAR (): Near NORMAL (): Normal FAR (): Far 5 1 2 3 4 5 6 7 During reception/playback, press , rotate the control dial until “SOUND” appears, then press it. Rotate the control dial until “POSITION” appears, then press it. Rotate the control dial until “SET F/R POS” appears, then press it. Rotate the control dial to select from “FRONT L, ” “FRONT R, ” “FRONT” or “ALL, ” then press it. Rotate the control dial until “SET SW POS” appears, then press it. Rotate the control dial to select the subwoofer position from “NEAR, ” “NORMAL” or “FAR, ” then press it. Press (BACK) to return to the previous display. DM+ Advanced DM+ Advanced improves digitally compressed sound by restoring high frequencies lost in the compression process. 1 2 3 4 During playback, press , rotate the control dial until “SOUND” appears, then press it. Rotate the control dial until “DM+” appears, then press it. Rotate the control dial to select “ON, ” then press it. The DM+ setting can be memorized for each source other than the tuner. 14 Using rear speakers as subwoofer — Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying a low pass filter setting (page 16) to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. 4 5 Rotate the control dial to select “1, ” “2” or “3, ” then press it. Press (BACK) to return to the previous display. [. . . ] Error displays/Messages CHECKING  The unit is confirming the connection of a USB device. € Wait until confirming the connection is finished. € See the installation/connections manual of this model to check the connection. HUB NO SUPRT (Hubs Not Supported)  USB hub is not supported on this unit. [. . . ]