User manual SONY CDX-GT530UI annexe 1

[. . . ] Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. the recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. [. . . ] Do not leave a USB device in a parked car, as malfunction may result. During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately. ⷠPlayback of the following MP3/WMA/AAC files is not supported. When using a cable, use the one supplied with the USB device to connect. Repeat and shuffle play playback starts. If a USB device is already connected, to start playback, press (SOURCE) repeatedly until "USB" appears. During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. If you remove your USB device during playback, data in the USB device may be damaged. notes · Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. ⷠDo not detach the front panel during playback of the USB device, otherwise USB data may be damaged. Other functions Changing the sound settings The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. The following items can be set (follow the page reference for details): EQ3 Selects an equalizer curve from 7 music types. LOW*1, MID*1, HI*1 (page 17) BAL (Balance) Adjusts the sound balance between the left and right speakers. FAD (Fader) Adjusts the relative level between the front and rear speakers. sUB*2 (Subwoofer volume) Adjusts the subwoofer volume. AUX*3 (AUX level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. The following items can be set (follow the page reference for details): CLOCK-ADJ (Clock Adjust) (page 6) CT (Clock Time) (page 12, 13) BEEP Activates the beep sound: "ON, " "OFF. OFF (Auto Off) Shuts off automatically after a desired time when the unit is turned off: "NO, " "30S (seconds), " "30M (minutes), " "60M (minutes). "CUSTOM" of EQ3 allows you to make your own equalizer settings. " LOCAL (Local Seek Mode) ­ "ON": to only tune into stations with stronger signals. " LOUD (Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON, " "OFF. [. . . ] The SEEK starts after a few seconds of listening. The station does not broadcast any traffic announcements despite being TP. You cannot play back items via a USB hub. This unit cannot recognize USB devices via a USB hub. [. . . ]