User manual SONY CDX-GT540UI

[. . . ] If your car is equipped with a power aerial, it will extend automatically while the unit is operating. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. [. . . ] You can play CDs in various modes: · The unit selects the stations with the strongest signals and memorises them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, MW, and LW). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. To return to normal play mode, select "REPOFF. Each time you press (SOURCE), the source changes as follows: Playing tracks in random order -- Shuffle Play Each time you press (MODE), the band changes as follows: Press (MENU), then press either side of (PRST) repeatedly until "BTM" appears. The unit stores stations in the order of their frequencies on the number buttons. To return to normal play mode, select "SHUFOFF. The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. If a CD is not in the unit, only the tuner band appears even if you press (SOURCE). in the Motion Display mode , all the items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. (See "Changing the sound and display settings" on page 20. ) Note "NO NAME" appears if the received station does not transmit RDS data. The unit starts searching for an alternative station with a stronger signal in the same network. When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF) repeatedly until "AF-OFF" appears. When "NO AF" and the station name flash alternately, it means that the unit cannot find an alternative station in the network. If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Press either side of (SEEK/AMS) while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI SEEK" appears and no sound is heard). If the unit cannot find another frequency, "NO PI" appears, and the unit returns to the previously selected frequency. [. . . ] Press (D-BASS) repeatedly until the desired bass level (1, 2, or 3) appears in the display. Note If the bass sound becomes distorted, select a less effective setting of "D. Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. The unit may not function properly if the connectors between the unit and the front panel are not clean. [. . . ]