User manual SONY CDX-GT547UI

[. . . ] ⷠSupplied with the rotary commander (for the CDX-5100RDS). The optional rotary commander can be used (for the CDX-GT547UI). You can use the rotary commander (RM-X2S) which is operated like your car's wiper or headlight switch while driving. Quick recovery mechanism for preventing sound skipping. [. . . ] forwarding to the end of the disc " to be displayed. Causes " In either case, you can neither proceed to the previous nor the following track. Playback stops also when you select another source (radio) by pressing the button. The first 10 seconds of all the tracks are played. When you find the desired track, press the button once more. Note If you leave the ejected disc in the disc insertion slot after you have pressed the 6 button, the disc will automatically retract into the unit after about 15 seconds in order to protect it. When the currently played track is over, it will be played again from the beginning. Press either side of the AMS/SEEK button once to search for the next station (automatic tuning). Press either side of the AMS/SEEK button repeatedly until the desired station is received. When an FM stereo programme with sufficient signal strength is tuned in, To keep the automatic tuning from stopping on stations too frequently (local seek mode), press BTM the SENS button momentarily to get the "LCL" indication. Only the stations with relatively strong signals will be tuned in. Receiving RDS data with your car stereo unit allows it to use a variety of services. There are several ways to use these services. For instance, you can receive information such as traffic announcements and station names, or you can cause the unit to automatically retune to the strongest signal that is broadcasting the same programme. So even if you travel a long distance, it is still possible to listen to the same programme without having to retune manually again and again. Another function allows you to receive traffic announcements during CD playback. RDS offers various functions, but depending on the country or region, not all of these are available. The following information explains the RDS functions of this unit. notes · In case of weak signals or other poor reception conditions, the RDS functions may not work properly. ⷠIf the FM station currently received does not transmit RDS data, the functions described below will not work. By using RDS data, the name of the station currently received can be displayed. When "*" appears in addition to the usual frequency indication, an RDS station is being received. [. . . ] N The unit will start to search for traffic information stations. When a station transmitting a traffic announcement is found, "TP" will be displayed. The TA function works also during CD playback. The unit will start to search for traffic announcements. [. . . ]