User manual SONY CDX-GT55UIW INSTALLATION/CONNECTIONS

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] When the mode setting is complete, the normal playback mode appears. *2 If the track name of an MD is not prerecorded, "NO NAME" appears in the display. *3 If the dual information is on , clock does not appear in the display. Tip If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then (1) (N). The Auto Scroll function automatically scrolls the disc name of the MD when the title length exceeds eight characters when you press (DSPL). Press (SHIFT), then press (2) (SET UP) repeatedly until "A. Press (DSPL) for two seconds during MD playback. The recording date of the track is displayed for about three seconds. During playback, press either side of (SEEK/AMS) once for each track you want to skip. Then press (3) (PLAY MODE) repeatedly until "REP" appears. During playback, press and hold either side of (SEEK/AMS). To load the disc, first press the number button, then choose the disc that has not been loaded. There are also some letters which cannot be displayed (during MD playback). Playing the specific tracks only you can select: · BANK-ON to play the tracks with the "PLAY" setting. ⷠBANK-INV (Inverse) to play the tracks with the "SKIP" setting. During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "BANK" appears. If you label the disc, you can set the unit to skip tracks and play only the tracks you want. Playback starts from the track following the current one. To go back to the normal playing mode, select "BANK-OFF" in step 2 above. Then press (3) (PLAY MODE) for two seconds. Note If you have not labeled the disc, the bank edit mode does not appear and the program edit appears. Press either side of (SEEK/AMS) to select the track number you want to skip and press (5) (ENTER). [. . . ] Back of the front panel ¡ Reset button (located on the front side of the unit hidden by the front panel) 4 !The buttons of the wireless remote work the same functions as those on this unit. 1 OFF button 2 DIR button (DIR) does not work with this unit. 3 SOURCE button 4 SEEK/AMS button 5 PRESET/DISC button You cannot do the manual search and manual tuning with the remote. [. . . ]