User manual SONY CDX-GT565UV

[. . . ] Be sure to install this unit in the dashboard of the car for safety. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This label is located on the bottom of the chassis. Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. [. . . ] Dynamic Color Illuminator allows you to change the color of the display and buttons on the main unit to match the car's interior. You can select from 12 preset colors, customized color and 5 preset patterns. Rotate the control dial until "CUSTOM-C" appears, then press it. Rotate the control dial until "BASE" appears, then press it. You can select a preset color as a basis for further customizing. when you select "BASE , " customized color is overwritten. Rotate the control dial to select from "RGB RED, " "RGB GRN, " or "RGB BLUE, " then press it. Rotate the control dial until "COLOR" appears, then press it. Changing DAY/NIGHT color mode You can set a different color for DAY/ NIGHT depending on the DIMMER setting. Note If the control dial is rotated rapidly, the color of the display and the buttons may change too quickly. OFF or AUTO (turn off the head light*2) ON or AUTO (turn on the head light*2) *2 Available only when the illumination control lead is connected. When you select a preset pattern, sound synchronization becomes effective. When you push on, the color of display and the buttons on the main unit turns white once, and then the color changes to the customized color. Rotate the control dial until "STARTWHT" appears, then press it. Rotate the control dial until "SND SYNC" appears, then press it. You can display the menu more clearly (White) without concern for color setting. Rotate the control dial until "WHT MENU" appears, then press it. Rotate the control dial until the desired menu item appears, then press it. ) AUX VOL*3 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. You can fine-tune the listening position setting. Rotate the control dial until "RB ENH" appears, then press it. [. . . ] The USB device contains files with a complicated tree structure. The sound may be intermittent at a high-bitrate of more than 320 kbps. The disc has been forcibly inserted upside down or in the wrong way. The CD-Rs/CD-RWs are not for audio use (page 22). [. . . ]