User manual SONY CDX-GT660UV

[. . . ] Be sure to install this unit in the dashboard of the car for safety. This label is located on the bottom of the chassis. Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. the Authorized Representative for EMC and product safety is Sony Deutschland GmbH , Hedelfinger Strasse 61 , 70327 Stuttgart , Germany. [. . . ] Changing DAY/NIGHT color mode You can set a different color for DAY/ NIGHT depending on the DIMMER setting. OFF or AUTO (turn off the head light*2) ON or AUTO (turn on the head light*2) *2 Available only when the illumination control lead is connected. The color of the display and buttons on the main unit changes according to the SensMeTM channel. You can display the menu more clearly (White) without concern for color setting. Rotate the control dial until "WHITE MENU" appears, then press it. Rotate the control dial until "SENSME COLR" appears, then press it. When you push on, the color of display and the buttons on the main unit turns white once, and then the color changes to the customized color. Rotate the control dial until "START WHITE" appears, then press it. When you select a preset pattern or play tracks in the SensMeTM channel, sound synchronization becomes effective. Rotate the control dial until "SOUND SYNC" appears, then press it. Rotate the control dial until the desired menu item appears, then press it. ) AUX VOLUME*2 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. Advanced Sound Engine creates an ideal incar sound field with digital signal processing. The following items can be set: EQ7 PRESET (page 21) EQ7 SETTING (page 22) POSITION POSITION (Listening Position setting) (page 22) ADJUST POS*1 (Listening Position adjustment) (page 23) SW POSITION*1 (Subwoofer Position) (page 22) BALANCE Adjusts the sound balance: "RIGHT-15" ­ "CENTER" ­ "LEFT-15. You can select an equalizer curve from 7 equalizer curves (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). Rotate the control dial until "EQ7 PRESET" appears, then press it. Rotate the control dial until the desired equalizer curve appears, then press it. Tip The equalizer curve setting can be memorized for each source. "CUSTOM" of EQ7 allows you to make your own equalizer settings. The unit can simulate a natural sound field by delaying the sound output from each speaker to suit your position. the options for "POSITION" are indicated below. [. . . ] For details on playable discs and formats, visit the support site. HUBS NO SUPRT (Hubs Not Supported) USB hub is not supported on this unit. INVALID The connected USB device does not contain a music file for the SensMeTM function. The unit starts searching for another frequency with the same PI (Program Identification) data ("PI SEEK" appears). [. . . ]