User manual SONY CDX-GT66UPW

[. . . ] 4-430-832-11(1) FM/AM Compact Disc Player Operating Instructions US Manual de instrucciones ES Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. To cancel the demonstration (DEMO) display, see page 5. [. . . ] Note If the control dial is rotated rapidly, the color of the display and the buttons may change too quickly. € If the track being searched is transferred by “Content Transfer, ” the most melodic or rhythmical sections of tracks are played (page 12). 19 Customizing the display and button color — Custom Color You can register a customized color for the display and buttons. Advanced color setting SensMe™ Channels synchronization — SensMe™ Channels Color The color of the display and buttons on the main unit changes according to the SensMe™ channel. 1 2 Press and hold . The DAY/NIGHT custom color display varies according to the DIMMER setting. Rotate the control dial until “BASE COLOR” appears, then press it. You can select a preset color as a basis for further customizing. when you select “BASE COLOR , ” customized color is overwritten. Rotate the control dial to select from “RGB RED, ” “RGB GREEN, ” or “RGB BLUE, ” then press it. Rotate the control dial to adjust the color range, then press it. adjustable color range: “0” – “32. € You cannot set “0” for all color ranges. Rotate the control dial until “SENSME COLR” appears, then press it. Rotate the control dial to select “SENSME-ON, ” then press it. Note When SensMe™ Channels Color is set to “ON” for the SensMe™ source, SensMe™ Channels Color overrides the preset color/pattern settings. 5 Changing DAY/NIGHT color mode You can set a different color for DAY/ NIGHT depending on the DIMMER setting. Color mode DIMMER*1 DAY NIGHT OFF or AUTO (turn off the head light*2) ON or AUTO (turn on the head light*2) Changing the color with sound synchronization — Sound Synchronization When you select a preset pattern or play tracks in the SensMe™ channel, sound synchronization becomes effective. *1 For details on the DIMMER, see page 25. *2 Available only when the illumination control lead is connected. Rotate the control dial until “SOUND SYNC” appears, then press it. Rotate the control dial to select “SYNC-ON, ” then press it. [. . . ] If the error indication remains on in the display, consult your nearest Sony dealer. € Disconnect the USB device, then change the source by pressing . € Indicates that the USB device is out of order, or an unsupported device is connected. READ  The unit is reading all track and album information on the disc. [. . . ]