User manual SONY CDX-GT72W

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] Press (MENU), then press either side of (DISC/PRST) repeatedly until "NAME DEL" appears. Press either side of (DISC/PRST) repeatedly to select the disc name you want to erase. Repeat steps 5 and 6 if you want to erase other names. The unit returns to normal CD play mode. Locating a disc by name -- List-up (For a CD unit with the custom file function or an MD unit) You can use this function for discs that have been assigned a custom name. For more information on disc memo names, refer to "Labeling a CD" (page 12). 1 Press (LIST). The name assigned to the current disc appears in the display. When you assign a disc memo name to a CD TEXT disc, it takes priority over the original CD TEXT information. 2 3 7 Press either side of (DISC/PRST) repeatedly until you find the desired disc. Press (ENTER) to play the disc. Note When a personalized label is erased, the original CD TEXT information will appear in the display. Notes · After a disc name has been displayed for five seconds, the display returns to normal play mode. · The track names are not displayed during MD or CD TEXT disc playback. · If there are no discs in the magazine, "NO DISC" appears in the display. · If a disc has not been assigned a custom file, "********" appears in the display. · Some letters cannot be displayed during MD or CD TEXT disc playback. · If a CD is not in the unit, only the tuner band appears even if you press (SOURCE). 15 Receiving the memorized stations 1 2 3 Press (SOURCE) repeatedly to select the tuner. Press (MODE) repeatedly to select the band. Press the number button ((1) to (6)) on which the desired station is stored. If FM stereo reception is poor -- Monaural Mode 1 2 During radio reception, press (MENU), then press either side of (DISC/PRST) repeatedly until "MONO-OFF" appears. Press the (+) side of (SEEK/AMS) until "MONO-ON" appears. The sound improves, but becomes monaural ("ST" disappears). Press (ENTER). 3 Tip Press either side of (DISC/PRST) to receive the stations in the order they are stored in the memory (Preset Search Function). To return to normal mode, select "MONOOFF" in step 2. If you cannot tune in a preset station Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (MENU), then press either side of (DISC/PRST) repeatedly until "LOCAL" (local seek mode) is displayed. Then press the (+) side of (SEEK/AMS) to select "LOCAL-ON. " Press (ENTER). Only the stations with relatively strong signals will be tuned in. Tips · When you select the "LOCAL-ON" setting, "L. SEEK" appears while the unit is searching for a station. [. . . ] "Cleaning the connectors" (page 25) for details. ·The beep sound is cancelled (page 21). ·If you connect an optional amplifier and do not use the builtin amplifier, the beep sound will be deactivated. CD/MD playback Problem A disc cannot be loaded. Cause/Solution ·Another CD is already loaded. [. . . ]