User manual SONY CDX-HR70MS

[. . . ] If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. If your car is equipped with a power aerial, it will extend automatically while the unit is operating. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. [. . . ] Each time you press (DSPL/PTY) during CD or CD TEXT disc playback, the item changes as follows: The unit will repeat the disc during the labelling procedure. If you want to put a blank space between characters, select "_" (underbar). *2 If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. If you press the (­) side of (SEEK/AMS), the previous character flashes. 3 Repeat steps 1 and 2 to enter the entire name. To return to normal CD play mode, press (ENTER). Press (MENU), then press either side of (DISC/PRST) repeatedly until "NAME DEL" appears. Press either side of (DISC/PRST) repeatedly to select the disc name you want to erase. Repeat steps 5 and 6 if you want to erase other names. The unit returns to normal CD play mode. You can use this function for discs that have been assigned custom names or for CD TEXT discs. SEEK" appears while the unit is searching for a station. If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning). Your car stereo offers you a variety of services. Here are just a few: retuning the same programme automatically, listening to traffic announcements, and locating a station by programme type. notes · Depending on the country or region, not all of the RDS functions are available. RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data. Tip The Motion Display mode can be turned off. (See "Changing the sound and display settings" on page 24. ) Note "NO NAME" appears if the received station does not transmit RDS data. By using this function, you can continuously listen to the same programme during a longdistance drive without having to retune the station manually. The unit starts searching for an alternative station with a stronger signal in the same network. [. . . ] Back of the front panel Notes · For safety, turn off the engine before cleaning the connectors, and remove the key from the ignition switch. Never touch the connectors directly with your fingers or with any metal device. After taking off the front panel, press the clip inside the front cover with a thin screwdriver, and gently pry the front cover free. Outputs Audio outputs*1 Power aerial relay control lead Power amplifier control lead Telephone ATT control lead*2 Bass ±9 dB at 100 Hz Treble ±9 dB at 10 kHz 12 V DC car battery (negative ground) Approx. [. . . ]