User manual SONY CDX-M700R

[. . . ] This unit lets you enjoy a variety of features using the following controller accessories: Supplied accessory Card remote commander RM-X95 (for the CDX-M700R) RM-X96 (for the CDX-M600R) Optional accessory Rotary commander RM-X4S In addition to the CD playback and radio operations, you can expand your system by connecting optional CD/MD units*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you playback a CD TEXT disc*2. This label is located on the bottom of the chassis. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. [. . . ] You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. If an emergency announcement comes in while you are listening to the radio, the programme will be automatically switched to it. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcements no matter which source you are listening to at the time. To cancel all traffic announcements, turn off the function by pressing (AF/TA) until "AF TA off" appears. When you preset RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. Presetting different settings for each preset station Press (AF/TA) repeatedly to select either "AF on, " "TA on" or "AF TA on" (for both AF and TA functions). Tip If you select the mode using the buttons on the unit, press (AF) and/or (TA) to select "AF on" and/ or "TA on. Press (AF/TA) repeatedly to select either "AF on, " "TA on" or "AF TA on" (for both AF and TA functions). Press the desired number button of the unit until "MEM" appears. Repeat from step 1 to preset other stations. Tip If you want to change the preset AF and/or TA setting after you tune in the preset station, you can do so by turning the AF or TA function on or off. Tip If you select the mode using the buttons on the unit, press (AF) and/or (TA) to select "AF on" and/ or "TA on. Press (MENU), then press M or m repeatedly until "BTM" appears. You can locate the station you want by selecting one of the programme types shown below. Press (DSPL/PTY) during FM reception until "PTY" appears. "- - - - -" appears if the received station is not an RDS station, or if the RDS data has not been received. Note You cannot use this function in some countries where no PTY (Programme Type selection) data is available. DAB (Digital Audio Broadcasting) is a new multimedia broadcasting system that transmits audio programmes with a quality comparable to that of CDs. This is made possible by the use of a microcomputer in the DAB tuner which uses the radio signals sent from multiple aerials and multi-path signals (reflected radio waves) to boost the strength of the main signal. [. . . ] You have closed the front panel or pushed the disc forcibly into the unit while the unit was ejecting the disc after you pressed Z. The unit is installed at an angle of more than 60°. The unit is not installed in a sturdy part of the car. You cannot label CDs unless you connect a CD unit with the custom file function. [. . . ]