User manual SONY CDX-M800

[. . . ] The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] ⷠThere is another way to start labeling a CD: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5. ⷠYou can label CDs on a unit without the CUSTOM FILE function if that unit is connected along with a CD unit that has the function. The Disc Memo will be stored in the memory of the CD unit with the CUSTOM FILE function. Note Repeat/shuffle play is suspended until the Name Edit is complete. Start playing the disc you want to label in a CD unit with the CUSTOM FILE function. Press (MENU), then press M or m repeatedly until "Name Edit" appears. As a display item, the Disc Memo always takes priority over any original CD TEXT information. View The unit will repeat the disc during the labeling procedure. Tip To find out about other items that can be displayed, see page 10. Press (MENU), then press M or m repeatedly until "Name Delete" appears. Repeat steps 5 and 6 if you want to erase other names. If you press <, you can move back to the left. 3 Repeat steps 1 and 2 to enter the entire name. To return to normal play mode, press (ENTER). If you cannot find the Disc Memo you want to erase, try selecting a different CD unit in step 2. ⷠIf you have already erased all of the Disc Memo, the unit returns to normal play mode in step 4. You can use this function for discs that have been assigned custom names*1 or for CD TEXT discs*2. *1 Locating a disc by its custom name: when you assign a name for a CD (page 12) or an MD. *2 Locating discs by the CD TEXT information: when you play a CD TEXT disc on a CD unit with the CD TEXT function. When tuning in stations while driving, use Best Tuning Memory to prevent accidents. The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. [. . . ] ⷠSome CD-Rs/CD-RWs may not play due to its recording equipment or the disc condition. The power connecting cord is not connected properly. An optional power amplifier is connected and you are not using the built-in amplifier. The unit is installed at an angle of more than 60°. [. . . ]