User manual SONY CDX-M9900

[. . . ] Thank you for purchasing this Sony Compact Disc Player. CD-R/CD-RW which can have a session added can be played (page 10). ) can be played, depending on the recording method (page 10). Optional controller accessory Wired rotary commander RM-X4S Wireless rotary commander RM-X6S *1 This unit works with Sony products only. [. . . ] The unit switches back to the original source when the bulletin is over. Press (TA) repeatedly until "TA" lights up. the unit starts searching for traffic information stations. "TP" lights up when detecting reception of such stations. The unit will continue searching for stations available with TP if "NO TP" appears momentarily. This function enables you to select other local stations in the area, even if they are not stored on your number buttons. Within 5 seconds, press the number button of the local station again. Repeat this procedure until the desired local station is received. You can preset the volume level of the traffic announcements so you won't miss hearing them. If either AF or TA is on, the unit will switch to emergency announcements, if one comes in while listening to an FM station, CD/MD, or AUX. When you preset RDS stations, the unit stores each station's AF/TA setting (on/off) as well as its frequency. You can select a different setting (for AF, TA, or both) for individual preset stations, or the same setting for all preset stations. If you preset stations with "AF" to on, the unit automatically stores stations with the strongest radio signal. You can tune in a station by selecting the type of programme you would like to listen to. Presetting different settings for each preset station " Press the desired number button ((1) to (6)) until "Memory" appears. Repeat from step 1 to preset other stations. Tip If you want to change the AF/TA setting while you are playing a CD, press (AF) and/or (TA). Note You cannot use this function in some countries/regions where no PTY (Programme Type selection) data is available. "None" appears if the received station is not an RDS station, or if the RDS data is not received. Tip You can also display the PTY list by using the main menu. During FM reception, press (MENU), and select "PTY" in "List, " then press (ENTER). The CT function may not work even though an RDS station is being received. [. . . ] Buttons and dials do not work while storing images. Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's aerial booster. When the DSO mode is on, the sound is sometimes hampered by noises. Only disc eject, sound attenuate and volume control are available during this process. [. . . ]