Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY CDX-MP50. We hope that this SONY CDX-MP50 user guide will be useful to you.
Lastmanuals help download the user guide SONY CDX-MP50.
You may also download the following manuals related to this product:
SONY CDX-MP50 annexe 1 (2788 ko)
Manual abstract: user guide SONY CDX-MP50
Detailed instructions for use are in the User's Guide.
[. . . ] " 3 To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers. Connecting any other system may damage the unit. 4 To the interface cable of a car telephone 5 To the +12 V power terminal which is energised in the accessory position of the ignition key switch Notes · If there is no accessory position, connect to the +12 V power (battery) terminal which is energised at all times. [. . . ] Run all earth wires to a common earth point. Be sure to insulate any loose unconnected wires with electrical tape for safety. When connecting this unit in combination with other stereo components, the connected car circuit's rating must be higher than the sum of each component's fuse. When no car circuits are rated high enough, connect the unit directly to the battery. The numbers in the list are keyed to those in the instructions. The bracket 1 and the protection collar 5 are attached to the unit before shipping. Before mounting the unit, use the release keys 6 to remove the bracket 1 and the protection collar 5 from the unit. Keep the release keys 6 for future use as they are also necessary if you remove the unit from your car. Handle the bracket 1 carefully to avoid injuring your fingers. 1 Catch Note Before installing, make sure that the catches on both sides of the bracket 1 are bent inwards 2 mm. If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Be sure to connect the earth cord before connecting the amplifier. If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. tip (2-B- ) For connecting two or more CD/MD changers, the source selector XA-C30 (optional) is necessary. [. . . ] If the frequency allocation system of your country is based on 10 kHz (200 kHz) interval, set the switch on the bottom of the unit to the 10 k (200 k) position before making connections. When the installation and connections are completed, be sure to press the RESET button with a ballpoint pen, etc. Bend these Claws outwards for a tight fit, if necessary. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY CDX-MP50
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY CDX-MP50 will begin.
SONY CDX-MP50 annexe 1 (2788 ko)
