User manual SONY CDX-MR50IP

[. . . ] *2 ID3 tag is an MP3 file that contains information about album name, artist name, track name, etc. The BBE MP process improves digitally compressed sound, such as MP3, by restoring and enhancing the higher harmonics lost through compression. BBE MP works by generating even-order harmonics from the source material, effectively recovering warmth, detail and nuance. This label is located on the bottom of the chassis. [. . . ] If you label a CD, you can locate the disc by name (page 16). Start playing the disc you want to label in a CD unit with the CUSTOM FILE function. Press (MENU), then press M or m repeatedly until "Name Edit" appears. During playback, press (2) (SHUF) repeatedly until the desired setting appears in the display. To return to normal play mode, select "SHUFoff. " Note "SHUF-All" will not shuffle tracks between CD units and MD units. If you press <, you can move back to the left. 3 Repeat steps 1 and 2 to enter the entire name. Simply overwrite or enter " " to correct or erase a character. There is another way to start labelling a CD: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5. If you leave this regional programme's reception area or would like to take advantage of the whole AF function, select "Regional-off" from the Menu (page 26). Note This function does not work in the United Kingdom and in some other areas. This function enables you to select other local stations in the area, even if they are not stored on your number buttons. Within 5 seconds, press the number button of the local station again. Repeat this procedure until the desired local station is received. You can preset the volume level of the traffic announcements so you won't miss hearing them. If either AF or TA is on, the unit will switch to emergency announcements, if one comes in while listening to an FM station or CD/MD/ AUX. When you preset RDS stations, the unit stores each station's AF/TA setting (on/off) as well as its frequency. You can select a different setting (for AF, TA, or both) for individual preset stations, or the same setting for all preset stations. If you preset stations with "AF-on, " the unit automatically stores stations with the strongest radio signal. You can tune in a station by selecting the type of programme you would like to listen to. [. . . ] Remove the front panel and clean the connectors. for details , see "Cleaning the connectors" on page 30. Stored stations and correct time are erased. Makes noise when the ignition key is in the ON, ACC, or OFF position. [. . . ]