User manual SONY CDX-MR60UI

[. . . ] Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. the recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. [. . . ] If you remove your USB device during playback, data in the USB device may be damaged. Repeat and shuffle play For details on the compatibility of your iPod, see "About iPod" on page 22 or visit the support site. DSO (Dynamic Soundstage Organizer) Creates a more ambient sound field. to select the DSO mode: "1 , " "2 , " "3" or "OFF. " The larger the number, the more enhanced the effect. LOW*1, MID*1, HI*1 (page 18) BAL (Balance) Adjusts the sound balance between the left and right speakers. FAD (Fader) Adjusts the relative level between the front and rear speakers. sUB (Subwoofer volume) Adjusts the subwoofer volume. AUX (AUX level)*2 Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. "CUSTOM" of EQ3 allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. The following items can be set (follow the page reference for details): CLOCK-ADJ (Clock Adjust) (page 6) CT (Clock Time) (page 12, 13) BEEP Activates the beep sound: "ON, " "OFF. " AUX-A*1 (AUX Audio) Activates the AUX source display: "ON , " "OFF" (page 19). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: "NO, " "30S (seconds), " "30M (minutes), " "60M (minutes). ­ "AT": to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected. LOCAL (Local Seek Mode) ­ "ON": to only tune into stations with stronger signals. " LOUD (Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON, " "OFF. " BTM (page 11) *1 When the unit is turned off. By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your boat's speakers. The volume level is adjustable for any difference between the unit and the portable audio device. [. . . ] The USB device contains files with a complicated tree structure. T Before disconnecting a USB device, make sure to stop playback first for data protection. The sound may be intermittent at a high-bit-rate of more than 320 kbps. T Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a boat's antenna (aerial) booster (only when your boat has built-in FM/MW/ LW antenna (aerial) in the rear/side glass). [. . . ]