User manual SONY CDX-S1000

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy its various features even more with: · This label is located on the bottom of the chassis. I ATT (attenuate) button 12 j BTM (Best Tuning Memory) button 10 k SENS button 11 l RESET button (located on the front side of the unit, behind the front panel) 7 m Number buttons Radio: Storing the desired station on each number button. SHUF button 10 REP button 10 EQ3 button 13 Receptor for the card remote commander s SEEK +/­ button Radio: Tuning in stations automatically/finding a station manually. [. . . ] When tuning in stations while driving, use Best Tuning Memory to prevent accidents. The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. Playing tracks in random order -- Shuffle Play You can select to play the tracks in the current disc in random order. During playback, press (SHUF) repeatedly until "SHUF-ON" appears in the display. To return to normal play mode, select "SHUF-OFF. The unit stores stations in the order of their frequencies on the number buttons. If only a few stations can be received due to weak signals, some number buttons will retain their former settings. ⷠWhen a number is indicated in the display, the unit starts storing stations from the one currently displayed. Press the number button ((1) to (6)) on which the desired station is stored. During radio reception, press (SENS) repeatedly until "MONO-ON" appears in the display. Scanning stops when the unit receives a station. Repeat the operation until the desired station is received. You can manually preset the desired stations on any chosen number button. If the automatic tuning stops too frequently, press (SENS) repeatedly until "LOCAL-ON" appears in the display. Press the desired number button ((1) to (6)) for 2 seconds until "MEM" appears. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) (+) or (SEEK) (­) to locate the approximate frequency, then press (SEEK) (+) or (SEEK) (­) repeatedly to fine adjust to the desired frequency (manual tuning). Note If you try to store another station on the same number button, the previously stored station will be erased. The following items can be set: ­ Select "ON" to activate the demonstration display (The demonstration starts about 10 seconds after the unit is turned off). Each time you press (SEL), the item changes as follows: *1 When no CD is playing, this item will not appear. Note Adjust within 3 seconds after selecting the item. Quickly attenuating the sound Tip When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). [. . . ] You tried to playback a CD-R/CD-RW not designed for audio use. ⷠSome CD-Rs/CD-RWs may not play due to its recording equipment or the disc condition. The power connecting lead is not connected properly. The unit is installed at an angle of more than 45°. [. . . ]