User manual SONY CDX-S2200

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy its various features even more with: · CD-R/CD-RW which can have a session added can be played (page 7). Discs recorded in Multi Session can be played, depending on the recording method (page 7). Optional controller accessories Card remote commander RM-X114 Rotary commander RM-X4S *2 ID3 tag is an MP3 file that contains information about album name, artist name, track name, etc. [. . . ] When an MP3 file is played and the album is changed, the new album number is displayed. To skip tracks continuously, press (SEEK) (+) or (SEEK) (­), then press again within 1 second and hold. notes · Before playing a track, this unit reads all track and album information on the disc. Depending on the track structure, it may take more than a minute before playback begins. during this time , "READ" is displayed. Please wait for play to start automatically when the reading is complete. Depending on the condition of the disc, it may not play back (page 6, 7). While the first/last track on the disc is playing, if (SEEK) (­) or (SEEK) (+) is pressed, playback skips to the last/first track of the disc. When the last track on the disc is over, playback restarts from the first track of the disc. If you play a high-bit rate MP3 file such as 320 kbps, sound may be intermittent. When tuning in stations while driving, use Best Tuning Memory to prevent accidents. During playback, press (3) (REP) repeatedly until the desired setting appears in the display. To return to normal play mode, select "REP-OFF. The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. Playing tracks in random order The unit stores stations in the order of their frequencies on the number buttons. During playback, press (4) (SHUF) repeatedly until the desired setting appears in the display. To return to normal play mode, select "SHUF-OFF. If only a few stations can be received due to weak signals, some number buttons will retain their former settings. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Press the number button ((1) to (6)) on which the desired station is stored. During radio reception, press (SENS) (BTM) repeatedly until "MONO-ON" appears in the display. Scanning stops when the unit receives a station. [. . . ] Remove the front panel and clean the connectors. for details , see "Cleaning the connectors" on page 21. Stored stations and correct time are erased. Makes noise when the ignition key is in the ON, ACC, or OFF position. [. . . ]