User manual SONY CD-X4000X

[. . . ] 3-043-292-11 (1) FM/AM Compact Disc Player Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Serial No. For installation and connections, see the supplied installation/connections manual. CDX-4000X CDX-4005 © 2000 Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] (See "Changing the sound and display settings" on page 16. ) Track number Elapsed playing time When the last track on the CD is over The track number indication returns to "1, " and playback restarts from the first track of the CD. To return to normal play mode, select "REPOFF. " 1 Press (SOURCE) repeatedly to select the tuner. Each time you press (SOURCE), the source changes as follows: Tuner y CD Playing tracks in random order -- Shuffle Play During playback, press (2) (SHUF). PTY DSPL MODE -SEEK/AMS 2 Press (MODE) repeatedly to select the band. Each time you press (MODE), the band changes as follows: B FM1 B FM2 B FM3 AM2 b AM1b ENTER REP SHUF 1 2 3 4 5 6 3 Shuffle Play starts. To return to normal play mode, select "SHUFOFF. " Press (MENU), then press either side of (PRST) repeatedly until "BTM" appears. The unit stores stations in the order of their frequencies on the number buttons. A beep sounds when the setting is stored. 4 Notes · The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. · When a number is indicated in the display, the unit starts storing stations from the one currently displayed. · If a CD is not in the unit, only the tuner band appears even if you press (SOURCE). 10 Memorizing only the desired stations You can preset up to 18 FM stations (6 each for FM1, FM2, and FM3), up to 12 AM stations (6 each for AM1 and AM2) in the order of your choice. Receiving the memorized stations 1 2 3 Press (SOURCE) repeatedly to select the tuner. Press (MODE) repeatedly to select the band. Press the number button ((1) to (6)) on which the desired station is stored. 1 2 3 4 Press (SOURCE) repeatedly to select the tuner. Press (MODE) repeatedly to select the band. Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button. Press the desired number button ((1) to (6)) for two seconds until "MEM" appears. The number button indication appears in the display. Tip Press either side of (PRST) to receive the stations in the order they are stored in the memory (Preset Search Function). If you cannot tune in a preset station Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (MENU), then press either side of (PRST) repeatedly until "LOCAL" (local seek mode) is displayed. Then press the (+) side of (SEEK/AMS) to select "LOCAL-ON. " Press (ENTER). Only the stations with relatively strong signals will be tuned in. Tips · When you select the "LOCAL-ON" setting, "L. SEEK" appears while the unit is searching for a station. · If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning). Note If you try to store another station on the same number button, the previously stored station will be erased. 11 If FM stereo reception is poor -- Monaural Mode Storing the station names -- Station Memo You can assign a name to each radio station and store it in memory. [. . . ] ·Set the fader control to the center position for two-speaker system. ·Rotate the dial clockwise to adjust the volume. ·The power cord or battery has been disconnected. ·The reset button has been pressed. [. . . ]