User manual SONY CD-X91

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] ·Change the disc. Other operations Rotate the VOL control to adjust the volume. Press (ATT) to attenuate the sound. OFF Press (SOUND) for two seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (page 14). Press (OFF) to turn off the unit. 13 Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. Changing the sound and display settings The following items can be set: ·CLOCK (page 6). ·D. INFO (Dual Information) - to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF). ·AMBER/GREEN - to change the illumination color to amber or green. ·DIM (Dimmer) - to change the brightness of the display. -- Select "ON" to dim the display. ·BEEP - to turn on or off the beeps. ·LOUD (Loudness) - to enjoy bass and treble even at low volume. ·RM (Rotary Commander) - to change the operative direction of the controls of the rotary commander. -- Select "NORM" to use the rotary commander as the factory-set position. (Only To cancel Auto Scroll, select "A. SCRL-OFF" in for CD TEXT discs with the artist name. ) *3 If the track name of a CD TEXT disc or MD is not step 3 above. prerecorded, "NO NAME" appears in the display. continue to next page n 15 Note For some CD TEXT discs with very many characters, the following cases may happen: -- Some of the characters are not displayed -- Auto Scroll does not work. Playing tracks repeatedly -- Repeat Play You can select: Tip ·REP-1 - to repeat a track. To manually scroll the long name of an MD or CD ·REP-2 - to repeat a disc. TEXT disc after activating the Auto Scroll function, Press (SHIFT), then(1) (N) (manual scroll). 1 2 During playback, press (SHIFT). Press (6) (REP) repeatedly until the desired setting appears. z REP-1 REP-OFF Z z REP-2 Locating a specific track -- Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track you want to skip. To locate succeeding tracks To locate preceding tracks SEEK/AMS Repeat Play starts. 3 Press (SHIFT). To return to normal playback mode, select "REP-OFF" in step 2 above. Locating a specific point in a track -- Manual Search During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point. SEEK/AMS Playing tracks in random order -- Shuffle Play You can select: ·SHUF-1 - to play the tracks on the current disc in random order. ·SHUF-2 - to play the tracks in the current unit in random order. ·SHIF-ALL - to play all the tracks in all the units in random order. To search forward To search backward Locating a disc by disc number -- Direct Disc Selection Press the number button that corresponds with the desired disc number. The desired disc in the current unit begins playback. 1 2 During playback, press (SHIFT). Press (7) (SHUF) repeatedly until the desired setting appears. z SHUF-1 SHUF-OFF Z z SHUF-2 SHUF-ALL* Z Shuffle Play starts. * "SHUF-ALL" is available for CD changer (s) only. 3 Press (SHIFT). To return to normal playback mode, select "SHUF-OFF" in step 2 above. 16 Labeling a CD -- Disc Memo (For a CD unit with the custom file function) You can label each disc with a personalized name. [. . . ] ·Set the fader control to the center position for two-speaker systems. ·Rotate the dial in a clockwise direction to adjust the volume. · The power cord or battery has been disconnected. · The reset button has been pressed. [. . . ]