User manual SONY CD-XA30

[. . . ] -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/ TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Welcome ! Thank you for purchasing this Sony Compact Disc Player. You can enjoy its various features. 1 Press (DSPL) for 2 seconds. [. . . ] Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog discs. Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Removing the unit 1 Insert the supplied tool between the unit and the frame, and rotate 90° to release the hidden mounting spring. Repeat on the opposite side and remove the frame. 2 Insert a flathead screwdriver between the bracket and mounting spring. Gently pry the spring toward the unit while pulling the unit out a little. Repeat on the opposite side and remove the unit. Fuse (10 A) Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. 10 mm (13/32 in. ) 4 mm (3/16 in. ) 90° Location of controls Refer to the pages listed for details. Radio The unit can store up to 6 stations per band (FM1, FM2, FM3, and AM1, AM2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Storing only the desired stations You can manually preset the desired stations on any chosen number button. SOURCE SRC MBP D-BASS MODE D OFF DISC REP SHUF BL SKIP ATA MTL SEEK AMS Storing stations automatically -- Best Tuning Memory (BTM) The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. 1 Press (SRC) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. The unit stores stations in the order of their frequencies on the number buttons. · You tried to playback a CD-R not designed for audio use. · Some CD-Rs may not play due to its recording equipment or the disc condition. The ambient temperature exceeds 50°C. · The unit is installed at an angle of more than 60°. · The unit is not installed in a sturdy part of the car. Dirty or defective disc. Receiving the stored stations 1 2 3 Press (SRC) repeatedly to select the radio. Press (MODE) repeatedly to select the band. Press the number button ((1) to (6)) on which the desired station is stored. General No sound. · Adjust the volume with volume + button. · Set the fader control to the center position for a 2-speaker system. The contents of the memory have been erased. [. . . ] The power is continuously supplied to the unit. The power antenna does not have a relay box. "MONO" indicator is displayed. The sound improves, but becomes monaural ("ST" disappears). To return to normal, press (SENS) again. If preset tuning does not work -- Automatic tuning/ Local Seek Mode Automatic tuning: Press either side of (SEEK/AMS) to search for the station. Scanning stops when the unit receives a station. [. . . ]