User manual SONY CD-XC5850

[. . . ] 3-865-688-11 (1) FM/AM Compact Disc Player Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. CDX-C5850 Serial No. For installation and connections, see the supplied installation/connections manual. CDX-C5850 © 1999 by Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] -- Select "REV" when you mount the rotary commander on the right side of the steering column. ·M. DSPL (Motion Display) - to turn the motion display on or off. ·A. SCRL (Auto Scroll) (page 7, 15). 1 Select the item you want to adjust by pressing (SOUND) repeatedly. VOL (volume) n BAS (bass) n TRE (treble) n BAL (left-right) n FAD (front-rear) 2 Adjust the selected item by rotating the dial. Adjust within three seconds after selecting the item. (After three seconds, the dial function reverts to volume control. ) Attenuating the sound Press (ATT) on the optional rotary commander. To restore the previous volume level, press (ATT) again. Note If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be disabled. Tip The unit decreases the volume automatically when a telephone call comes in (Telephone ATT Press (SHIFT). function). 1 2 Press (2) (SET UP) repeatedly until the desired item appears. Each time you press (2) (SET UP), the item changes as follows: CLOCK nD. INFO* nAMBER/GREEN nDIM n BEEP n LOUD n RM n M. DSPL n A. SCRL* * When no CD or MD is playing, this item will not appear. Note The displayed item will differ depending on the source. 3 4 Press (4) (n) to select the desired setting (Example: ON or OFF). After the mode setting is complete, the display returns to normal playback mode. 14 With Optional Equipment CD/MD Unit This unit can control a maximum of seven external CD/MD units in this configuration: CD unit - maximum of five MD unit - maximum of five. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. You can label CD and CD TEXT discs with a personalized name using the disc memo function. Refer to "Labeling a CD" (page 17). However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed. Tip If you want to display the original CD TEXT information after labeling the CD TEXT disc with a personalized name, press (SHIFT), then(4) (n). Playing a CD or MD 1 2 Press (SOURCE) repeatedly to select CD or MD. Press (MODE) until the desired unit appears. CD/MD playback starts. After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. (See "Changing the sound and display settings" on page 14). Automatically scrolling a disc name -- Auto Scroll If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: · The disc name appears when the disc has changed (if the disc name is selected). · The track name appears when the track has changed (if the track name is selected). When a CD/MD unit is connected, all the tracks play from the beginning. Changing the display item Each time you press (DSPL) during CD, CD TEXT, or MD playback, the item changes as follows: $ Track number/ Elapsed playback time $ Disc name*1/Artist name*2 $ Track name*3 $ Clock If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. 1 2 3 4 During playback, press (SHIFT). Press (2) (SET UP) repeatedly until "A. SCRL" appears. Press (4) (n) to select "A. SCRL-ON. " *1 If you have not labeled the disc or if there is no disc name prerecorded on the MD, "NO NAME" appears in the display. *2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. [. . . ] n Store again into the memory. The contents of the memory have been erased. Indications do not appear in the Remove the front panel and clean the connectors. "Cleaning the connectors" (page 23) for details. ·An optional power amplifier is connected and you are not using the built-in amplifier. ·The beep sound is canceled (page 14). CD/MD playback Problem A disc cannot be loaded. [. . . ]