User manual SONY CD-XC6750

[. . . ] 3-865-913-11 (1) FM/AM Compact Disc Player Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. CDX-C6750 Serial No. For installation and connections, see the supplied installation/connections manual. CDX-C6750 © 1999 by Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] -- Select "NORM" to use the rotary commander as the factory-set position. -- Select "REV" when you mount the rotary commander on the right side of the steering column. · M. DSPL (Motion Display) - to turn the motion display on or off. · A. SCRL (Auto Scroll) (page 8, 18). Note If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be disabled. 1 Select the item you want to adjust by pressing (SOUND) repeatedly. VOL (volume) n SUB (subwoofer volume) n BAS (bass) n TRE (treble) n BAL (left-right) n FAD (front-rear) 2 Adjust the selected item by rotating the dial. Adjust within three seconds after selecting the item. (After three seconds, the dial function reverts to volume control. ) Attenuating the sound Press (ATT) on the optional rotary commander or wireless remote. To restore the previous volume level, press (ATT) again. Tip The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). 1 2 Press (SHIFT). Press (3) (SET UP) repeatedly until the desired item appears. Each time you press (3) (SET UP), the item changes as follows: CLOCK n D. INFO* n AMBER/GREEN n DIM n BEEP n RM n HPF* n LPF* n M. DSPL n A. SCRL* * When no CD or MD is playing, this item will not appear. Note The displayed item will differ depending on the source. 3 4 Press (5) (n) to select the desired setting (Example: ON or OFF). After the mode setting is complete, the display returns to normal playback mode. 15 Boosting the bass sound -- D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. Level D-BASS 3 D-BASS 2 D-BASS 1 Adjusting the frequency of the speakers and the subwoofer(s) By setting the cut off level of unwanted frequency signals, the speakers connected to the output terminal and/or the subwoofer(s) connected to the sub out terminal will out put a cleare sound image. Adjusting the frequency of the speakers connected from the output terminal -- High Pass Filter (HPF) To match the characteristics of the connected speakers from the output terminal, you can cut out the unwanted low frequency signals entering the speakers. 0dB Frequency (Hz) Adjusting the bass curve Turn the D-BASS control to adjust the bass level (1, 2 or 3). "D-BASS" appears in the display. To cancel, turn the control to OFF. Note If the bass sound becomes distorted, adjust the DBASS control or volume. 1 2 3 Press (SOURCE) to select a source (radio, CD, or MD). Press (SHIFT), then press (3) (SET UP) repeatedly until "HPF" appears. Press (5) (n) or (2) (N) repeatedly to select desired setting. Each time you press (5) (n) or (2) (N), the cut-off frequency in the display changes as follows: HPF OFF ~ HPF 80 HZ ~ HPF 120 HZ 4 Press (SHIFT). When the frequency setting is complete, the display returns to the normal playback mode. 16 Adjusting the frequency of the subwoofer(s) -- Low Pass Filter (LPF) To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s). With Optional Equipment CD/MD Unit This unit can control a maximum of seven external CD/MD units in this configuration: CD unit - maximum of five MD unit - maximum of five. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. 1 2 3 Press (SOURCE) to select a source (radio, CD, or MD). Press (SHIFT), then press (3) (SET UP) repeatedly until "LPF" appears. [. . . ] n Store again into the memory. The contents of the memory have been erased. Indications do not appear in the Remove the front panel and clean the connectors. "Cleaning the connectors" (page 26) for details. ·An optional power amplifier is connected and you are not using the built-in amplifier. ·The beep sound is canceled (page 15). CD/MD playback Problem A disc cannot be loaded. [. . . ]