User manual SONY CD-XC6850

[. . . ] 3-865-912-11 (1) FM/AM Compact Disc Player Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. CDX-C6850 Serial No. For installation and connections, see the supplied installation/connections manual. CDX-C6850 © 1999 by Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] · Amber/Green - to change the illumination color to amber or green. · Dimmer - to change the brightness of the display. -- Select "on" to dim the display. · Contrast - to adjust the contrast if the indications in the display are not recognizable because of the unit`s installed position. · Beep - to turn on or off the beeps. · RM (Rotary Commander) - to change the operative direction of the controls of the rotary commander. -- Select "norm" to use the rotary commander as the factory-set position. -- Select "rev" when you mount the rotary commander on the right side of the steering column. · Loud (Loudness) - to enjoy bass and treble even at low volume. · M. dspl (Motion display) - to turn the motion display 1, 2, or off. · A. Scrl (Auto Scroll) (page 8, 17). Note If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be disabled. 1 2 Press (SHIFT). Press (3) (SET UP) repeatedly until the desired item appears. Each time you press (3) (SET UP), the item changes as follows: Clock n D. Info* n Amber/Green n Dimmer n Contrast n Beep n RM n Loud* n HPF* n LPF* n M. dspl n A. Scrl* * When no CD or MD is playing, this item will not appear. Note The displayed item will differ depending on the source. 3 Press (5) (n) to select the desired setting (Example: on or off). For the "Contrast" setting, pressing (5) (n) makes the contrast higher, and pressing (2) (N) makes the contrast lower. After the mode setting is complete, the display returns to normal playback mode. 4 15 Adjusting the frequency of the speakers and the subwoofer(s) By setting the cut off level of unwanted frequency signals, the speakers connected to the output terminal and/or the subwoofer(s) connected to the sub out terminal will out put a cleare sound image. Adjusting the frequency of the subwoofer(s) -- Low Pass Filter (LPF) To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s). 1 2 3 Press (SOURCE) to select a source (radio, CD, or MD). Press (SHIFT), then press (3) (SET UP) repeatedly until "LPF" appears. Press (5) (n) or (2) (N) repeatedly to select desired setting. Adjusting the frequency of the speakers connected from the output terminal -- High Pass Filter (HPF) To match the characteristics of the connected speakers from the output terminal, you can cut out the unwanted low frequency signals entering the speakers. 1 2 3 Press (SOURCE) to select a source (radio, CD, or MD). Press (SHIFT), then press (3) (SET UP) repeatedly until "HPF" appears. Press (5) (n) or (2) (N) repeatedly to select desired setting. Each time you press (5) (n) or (2) (N), the cut-off frequency in the display changes as follows: LPF OFF ~ LPF 80 Hz ~ LPF 120 Hz 4 Press (SHIFT). When the frequency setting is complete, the display returns to the normal playback mode. Each time you press (5) (n) or (2) (N), the cut-off frequency in the display changes as follows: HPF OFF ~ HPF 80 Hz ~ HPF 120 Hz 4 Press (SHIFT). When the frequency setting is complete, the display returns to the normal playback mode. 16 With Optional Equipment CD/MD Unit This unit can control a maximum of seven external CD/MD units in this configuration: CD unit - maximum of five MD unit - maximum of five. [. . . ] n Store again into the memory. The contents of the memory have been erased. Indications do not appear in the Remove the front panel and clean the connectors. "Cleaning the connectors" (page 25) for details. ·An optional power amplifier is connected and you are not using the built-in amplifier. ·The beep sound is canceled (page 15). CD/MD playback Problem A disc cannot be loaded. [. . . ]