User manual SONY CD-XL550X

[. . . ] 3-226-678-11 (1) FM/AM Compact Disc Player Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. CDX-L550X Serial No. For installation and connections, see the supplied installation/connections manual. CDX-L550X © 2001 Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5. Locating a station by name -- List-up 1 During radio reception, press (LIST). The name assigned to the station currently tuned appears in the display. Displaying the station name Switch the display item to frequency or station name*. To Switch display item Press (DSPL) during radio reception 2 * If the station name is not stored, "NO NAME" appears in the display for one second. Erasing the station name Press either side of (PRESET) repeatedly until you find the desired station. If no name is assigned to the selected station, the frequency appears in the display. Press (ENTER) to tune in the desired station. 1 2 3 4 During radio reception, press (MENU), then press either side of (PRESET) repeatedly until "NAME DEL" appears. Press either side of (PRESET) repeatedly to select the station whose name you want to erase. Repeat steps 3 to 4 if you want to erase other names. The unit returns to normal radio reception mode. 3 5 Note If you have already erased all of the station names, "NO DATA" appears in step 4. 13 By rotating the control Other Functions You can also control the unit with a rotary commander (optional). SEEK/AMS control Using the rotary commander First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls. Rotate and release to: ­ Skip tracks. Rotate, hold, and release to: ­ Fast-forward/reverse a track. ­ find a station manually. By pushing in and rotating the control SOUND MODE DSPL DSPL MODE SOUND PRESET control By pressing buttons (ATT) (SEL) (MODE) (SOURCE) (DSPL) Rotate the VOL control to adjust the volume. OFF Push in and rotate the control to: ­ Receive preset stations. (OFF) Press (SOURCE) (MODE) (ATT) (OFF)* (SOUND) (DSPL) To Change source (radio/CD) Change radio band Attenuate sound Stop playback or radio reception Adjust the sound menu Change the display item * If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning off the ignition. 14 Changing the operative direction The operative direction of controls is factoryset as shown below. To increase Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. The bass and treble levels can be stored independently for each source. To decrease 1 If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Select the item you want to adjust by pressing (SOUND) repeatedly. Each time you press (SOUND), the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) 2 Adjust the selected item by pressing either side of (SEEK). When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Press (SOUND) for 2 seconds while pushing the VOL control. Note Adjust within 3 seconds after selecting the item. Quickly attenuating the sound (With the rotary commander or the card remote commander) Press (ATT) on the rotary commander or card remote commander. After "ATT-ON" momentarily appears, the "ATT" appears in the display. To restore the previous volume level, press (ATT) again. 15 Changing the sound and display settings -- Menu The following items can be set: 1 2 3 4 Press (MENU). To set A. SCRL, press (MENU) during CD Playback. Press either side of (PRESET) repeatedly until the desired item appears. Press the (+) side of (SEEK) to select the desired setting (Example: ON or OFF). After the mode setting is completed, the display returns to normal play mode. SET (Set Up) ·CLOCK (page 9) ·BEEP -- to turn the beeps on or off. ·RM (Rotary Commander) -- to change the operative direction of the controls of the rotary commander. -- Select "NORM" to use the rotary commander as the factory-set position. [. . . ] ·The unit is not installed in a sturdy part of the car. continue to next page t 21 Radio reception Preset tuning is not possible. ·Store the correct frequency in the memory. ·The broadcast signal is too weak. [. . . ]