User manual SONY CFD-CD777L

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. the FUNCTION selector is located at the front. When you turn on the player, the OPR/BATT indicator lights up. [. . . ] To change the current program Press p once if the CD is stopped and twice if the CD is playing. Then create a new program following the programing procedure. Make sure you turn off the power before making any connections. To detach the speakers, unlock speaker (see B on the diagram) and slide the speaker box all the way up and away from the player. If you connect any other speakers or equipment, malfunction may occur. Align the grooves and slide the speaker box down until it snaps into place A. Tip Only for the customers supplied with an AC plug adaptor: Use the supplied AC plug adaptor if the plug of the AC power cord does not match your outlet. Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet. CFD-CD777S only: Adjusting the voltage Be sure to set the VOLTAGE SELECTOR (at the rear) to your local power supply. Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones. Tip Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player. Insert eight R20 (size D) batteries (not supplied) into the battery compartment. To use the player on batteries, disconnect the AC power cord from the player. You can enjoy the sound from a TV or VCR through the speakers of this player. Tip You can record the sound of the connected component. Before making connections, be sure to turn off the power of each equipment, and set FUNCTION to TAPE· You can adjust the audio emphasis of the sound you are listening to. The graphic equalizer will not work in any other position. Use MEGA BASS 400 Hz 1 kHz 4 kHz 10 kHz To adjust deep bass sound speaking voice, middle frequencies of instrumental music presence of vocals brightness of sound high treble sounds or to reduce high frequency noise/tape hiss Set the PRESET MODE selector to the sound mode you want. Use MANUAL DISCO PARTY LIVE To adjust the sound using the 5 BAND GRAPHIC EQUALIZER. [. . . ] Unplug the headphones when listening through speakers. Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. Clean the CD, or replace it if the CD is badly damaged · Place the player in a location free from vibration. ⷠReplace all the batteries with new ones if they are weak. [. . . ]