User manual SONY CFD-CD777S

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the appliance. the FUNCTION selector is located at the front. [. . . ] After you've created the program, insert a blank tape into deck B and press z on deck B to start recording. Press the number buttons for the tracks you want to program in the order you want. Playing order Programed track You can record sound using a microphone (not supplied) or use the player as a public address system. Plug the microphone into the MIX MIC jack and turn on the microphone if it has a power switch. Sing or speak into the microphone and adjust the volume. Acoustic feedback (howling) tend to occur when you use a microphone with echo function. ⷠIf acoustic feed back (howling) occurs, turn down the volume or move the microphone away from the speakers. Tip You can mix CD or radio sounds and record them by adding your voice or other audio through the microphone. Plug the microphone into the MIX MIC jack and turn on the microphone if it has a power switch. You can select the audio emphasis of the sound you are listening to. Using the PRESET MODE Set the PRESET MODE selector to the sound mode you want. Use MANUAL To select the sound using the 5 BAND GRAPHIC EQUALIZER. Get powerful, clear sounds emphasizing low and high range audio. Get light, bright sounds emphasizing high and middle range audio. Get wide-ranging sounds having presense. Adjusting the sound balance of the left and right speakers Use BALANCE. note When selecting the 5 BAND GRAPHIC EQUALIZER , be sure to set the PRESET MODE selector to MANUAL. The graphic equalizer will not work in any other position. Using the 5 BAND GRAPHIC EQUALIZER Slide 5 BAND GRAPHIC EQUALIZER to select the audio emphasis you want. Use MEGA BASS 400 Hz To select deep bass sound speaking voice, middle frequencies of instrumental music presence of vocals brightness of sound high treble sounds or to reduce high frequency noise/tape hiss You can use the AC power or batteries as a power source. Left speaker Speaker cord 2 to a wall outlet Box down until it snaps into place A. To detach the speakers, unlock speaker (see B on the diagram) and slide the speaker box all the way up and away from the player. [. . . ] notes on CDs · Before playing, clean the CD with a cleaning cloth. Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. ⷠDo not stick paper or sticker on the CD, nor scratch the surface of the CD. ⷠAfter playing, store the CD in its case. [. . . ]