User manual SONY CFD-F10

[. . . ] Precautions On safety · As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. · Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. · Discs with non-standard shapes (e. g. , heart, square, star) cannot be played on this player. [. . . ] · Remove any obstacles in the path of the remote and the player. · Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. · Move closer to the player when using the remote. After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer. The sound drops out. · Reduce the volume. · Clean the CD, or replace it if the CD is badly damaged. · Place the player in a location free from vibration. · Clean the lens with a commercially available blower. · The sound may drop out or noise may be heard when using poor quality CD-Rs/CDRWs or if there is a problem with the recording device or application software. Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 110 s (sec. ) with Sony cassette C-60 Frequency response TYPE I (normal): 80 - 13 000 Hz 3-264-047-61 (1) About CD-Rs/CD-RWs This player can play CD-Rs/CD-RWs recorded in the CD-DA format*, but playback capability may vary depending on the quality of the disc and the condition of the recording device. * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. General Speaker Full range: 10 cm dia. , 6 ohms, cone type (2) Tweeter: 2 cm dia. (1) Outputs Headphones jack (stereo minijack) For 16 - 68 ohms impedance headphones Power output 4. 5 W + 4. 5 W (at 6 ohms, 10% harmonic distortion) Power requirements For CD radio cassette-corder: 120 V AC, 60Hz 9 V DC, 6 size D (R20) batteries For remote control: 3 V DC, 2 size AAA (R03) batteries Power consumption AC 25 W Battery life For CD radio cassette-corder: FM recording Power Sources B C Radio Reception is poor. · Reorient the antenna to improve FM reception. Music discs encoded with copyright protection technologies This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. A 1 to AC IN Notes · Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player. · To use the player on batteries, disconnect the AC power cord from the player. · When you operate the player on batteries, you cannot turn on the player using the remote. 2 to the wall outlet On operation · If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the CD player section. Should this occur, the player will not operate properly. [. . . ] 3 Press z. Selecting the play mode To turn on/off the power Press POWER. Press MODE until "REP 1" "REP ALL" "SHUF" "SHUF REP" "PGM" "PGM REP" appears in the display. Then proceed as follows: To repeat a single track repeat all the track shuffle play repeat tracks in random order program play Then do this Press . or > to select the track that you want to repeat, then press u. [. . . ]