User manual SONY CFD-G500L

[. . . ] As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. , heart, square, star) cannot be played on this player. Break off the cassette tab from side A or B to prevent accidental recording. [. . . ] Replace all the batteries in the remote with new ones if they are weak. ⷠMake sure that you are pointing the remote at the remote sensor on the player. ⷠRemove any obstacles in the path of the remote and the player. ⷠMake sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. ⷠMove closer to the player when using the remote. After trying the above remedies, if you still have problems, unplug the mains lead and remove all the batteries. After all the indications in the display disappear, plug the mains lead and insert the batteries again. This player can play CD-Rs/CD-RWs recorded in the CD-DA format*, but playback capability may vary depending on the quality of the disc and the condition of the recording device. , 4 , cone type (1) Input LINE IN jack (stereo minijack): Minimum input level 330 mV Output Headphones jack (stereo minijack) For 16 - 68 impedance headphones Maximum power output Full range: 8 W Woofer: 12 W Power requirements For CD radio cassette-corder: 230V AC, 50 Hz 12 V DC, 8 R20 (size D) batteries For remote control: 3 V DC, 2 R03 (size AAA) batteries Power consumption AC 30 W Battery life For CD radio cassette-corder: FM recording Music discs encoded with copyright protection technologies This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Connect the mains lead A or insert eight R20 (size D) batteries (not supplied) into the battery compartment B . Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player. ⷠTo use the player on batteries, disconnect the mains lead from the player. ⷠWhen you operate the player on batteries, you cannot turn on the player using the remote. If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the CD player section. Should this occur, the player will not operate properly. [. . . ] Programmed track Playing order * For a track whose number is more than 20, the remaining time appears as "- -:- -" in the display. You need to preset a station with a weak signal manually. MEMORY for 2 seconds until the preset number flashes in the display. 5 Press PRESET + or ­ until the preset number you want for the station flashes in the display. [. . . ]