User manual SONY CFD-G505BLACK

[. . . ] CAUTION 2-663-603-11(1) The use of optical instruments with this product will increase eye hazard. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Basic Operations To Pause playback Press on the unit ( on the remote) . (forward) or (backward) while playing and hold it until Tips · Adjusting the volume or the audio emphasis will not affect the recording level. [. . . ] Press the button again to resume recording. on the unit. Stop recording Track number Playing time Other Operations Using the display You can check information about the CD using the display. Precautions Creating your own program (Program Play) You can arrange the playing order of up to 20 tracks on a CD. Troubleshooting General The power is not on. · Connect the AC power cord to the wall outlet securely. · Make sure the batteries are inserted correctly. · Replace all the batteries with new ones if they are weak. · You cannot turn on the unit with the remote when you operate the unit on batteries. Remote The remote does not function. · Replace all the batteries in the remote with new ones if they are weak. · Make sure that you are pointing the remote at the remote sensor on the unit. · Remove any obstacles in the path of the remote and the unit. · Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. · Move closer to the unit when using the remote. After trying the remedies, if you still have problems, unplug the AC power cord or remove all the batteries. The display changes as follows: The current track number and playing time The current track number and the remaining time of the current track* The number of tracks left and the time remaining on the CD * For a track whose number is more than 20, the remaining time appears as "- - : - -" in the display. Programed track number Playing order Falling asleep to music 1 Play the music source you want. 2 Press SLEEP to display "SLEEP. " 3 Press SLEEP to select the minutes until the 4 Press on the unit to start Program Play. On the remote · Use instead of . · After you have selected "PGM", press the number buttons for the tracks you want to program in the order you want. CD player · Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. · Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. · Do not stick paper or sticker on the CD, nor scratch the surface of the CD. · After playing, store the CD in its case. To cancel Program Play Press MODE until "PGM" disappears from the display. Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, Shuffle or Program play modes. To check the order of tracks before play Press DISPLAY·ENTER·MEMORY on the unit. Every time you press the button, the track number appears in the programed order. unit goes off automatically. Each time you press the button, the indication changes as follows: "60" "90" "120" "OFF" "10" "20" "30". If 4 seconds have passed after you pressed SLEEP , the minutes in the display are entered. When the preset time has passed, the unit goes off automatically. The CD does not play or "no dISC" is displayed even when a CD is in place. · Place the CD with the label surface up. · Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. · There is a problem with the quality of the CD-R/ CD-RW, recording device or application software. · Replace all the batteries with new ones if they are weak. To cancel the sleep function Note Press POWER to turn off the power. When you are playing a tape using this function: If the tape length of one side is longer than the set time, the unit will not go off until the tape reaches the end. On safety · As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. [. . . ] The ventilation holes must be unobstructed for the unit to operate properly and prolong the life of its components. · Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or springwound watches away from the unit to prevent possible damage from the magnet. · Reorient the unit itself to improve AM reception. To cancel Repeat Play If a station cannot be preset automatically You need to preset a station with a weak signal manually. Press MODE until "REP" disappears from the display. 1 Press RADIO BAND·AUTO PRESET on the unit to select the band. Recording the sound from the connected component Playing tracks in random order (Shuffle Play) You can play tracks in random order. 2 Tune in a station you want. 3 Hold down DISPLAY·ENTER·MEMORY on the unit for 2 seconds until the preset number flashes in the display. 1 Insert a blank cassette. 2 Press LINE on the unit to display "LInE". [. . . ]