User manual SONY CFD-G50L

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. The instructions in this manual are for the CFD-G30, CFD-G30L, CFD-G50 and CFDG50L. Before you start reading, check your model number. the CFD-G50L is the model used for illustration purpose. [. . . ] You can repeat part of a CD (LOOP) and can "flash" the CD sound (FLASH) during playback. To repeat a selected part of a CD "flash" the CD sound Press and hold LOOP FLASH You can store radio stations into the player's memory. You can preset up to 30 radio stations (CFD-G30/G50) or 40 Radio stations (CFD-G30L/ G50L), 10 for each band in any order. Tip If you automatically preset the "FM1" or "FM2" band, 10 radio stations are stored in "FM1" band and 10 more radio stations are stored in "FM2" band. AUTO PRESET until the band you want appears in the display. The stations are stored in memory from the lower frequencies to the higher ones. On the remote (CFD-G50/G50L only) 1 Press BAND until the band you want appears in the display. 3 Hold down the number buttons that you want to preset the new station on for about 2 seconds. If a station cannot be preset automatically You need to preset a station with a weak signal manually. MEMORY for 2 seconds until the preset number flashes in the display. 4 Press PRESET + or ­ until the preset number (1 to 10) you want for the station flashes in the display. Once you've preset the stations, use PRESET + or ­ to tune in to your favorite stations. You can adjust the audio emphasis of the sound you are listening to. Choose To get powerful, clean sounds, emphasizing low and high range audio light, bright sounds emphasizing high and middle range audio percussive sounds, emphasizing bass audio the presence of vocals, stressing middle range audio the whole dynamic range for music such as classical music On the remote (CFD-G50/G50L only) Press WOOFER. notes · While the sleeping timer is on, the POWER DRIVE WOOFER button does not light, even if the WOOFER function works. ⷠWhen using the headphones, the WOOFER function does not work. When POWER DRIVE WOOFER function works, the button lights up. To return to normal sound, press the button until the indication disappears from the display . Falling asleep to music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. Note When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the end. " Press SLEEP to select the minutes until the player goes off automatically. Each time you press the button, the indication changes as follows: "60" t "90" t "120" t no indication t "10" t "20" t "30. [. . . ] Before playing, clean the CD with a cleaning cloth. Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape. Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. [. . . ]