User manual SONY CFD-G700CP

[. . . ] CAUTION 3-096-718-11(1) The use of optical instruments with this product will increase eye hazard. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Basic Operations Playing a CD/MP3 disc 1 Press PUSH OPEN/CLOSE on the unit, and place a disc with the label side up on the CD compartment. [. . . ] on the unit. WOOFER function is used. work. Note Connect the AC power cord or insert eight R20 (size D) batteries (not supplied) into the battery compartment . Notes Replace the batteries when the OPR/BATT indicator dims or when the unit stops operating. To use the unit on batteries, disconnect the AC power cord from the unit. You cannot locate a specific track if "SHUF" or "PGM" is lit in the display. Press , and then press MODE repeatedly until "SHUF" and "PGM" disappear from the display. Stop playback Fast-forward or rewind* Eject the cassette . Example of folder structure and playing order The playing order of the folders and files is as follows: Folder MP3 file Replace all the batteries with new ones. You can preset up to 30 radio stations, 20 for FM and 10 for AM in any order. Connecting optional component You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. Discs that this unit CAN play Audio CD CD-R/CD-RW (CD-DA*/MP3 files) * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. The button does not function or the tape does not play or record. Make sure the safety tab on the cassette is in place. Checking the information of an audio CD To check the total track number and playing time of the CD Press while the CD is stopped, and you can check them in the display. 1 Press RADIO/BANDAUTO PRESET on the unit to select the band. Discs that this unit CANNOT play CD-R/CD-RW other than those recorded in music CD 1 Press . "CD" appears in the display. 2 Hold down RADIO/BANDAUTO PRESET on the 3 Press DSPL/ENT on the unit. The stations are stored in memory from the lower frequencies to the higher ones. 2 Press MODE until "SHUF" appears in the display. When you select Folder Shuffle Play (MP3 disc only), press MODE on the unit until " " and "SHUF" appear in the display. Then press TUNE + or ­ on the unit to select a folder you want. unit for 2 seconds until "AUTO" flashes in the display. format or MP3 format conforming to ISO9660 Level 1/Level 2 or Joliet CD-R/CD-RW of poor recording quality, CD-R/CD-RW that has scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Poor or distorted playback, recording or erasing quality. Clean the heads by using dry- or wet-type cleaning There is no audio. Make sure the function you want to use appears in the Unplug the headphones when listening through display window. speakers. Total track number Total playing time 3 Press on the unit to start Shuffle Play. If a station cannot be preset automatically select the band. Notes on discs Before playing, clean the CD with a cleaning cloth. You need to preset a station with a weak signal manually. On the remote 1 Press RADIO/BANDAUTO PRESET on the unit to 2 Tune in a station you want. 3 Hold down DSPL/ENT on the unit for 2 seconds until the preset number flashes in the display. Checking the information of an MP3 disc To check the total folder number and total file number on the CD Press while the CD is stopped, and you can check them in the display. Use instead of . Wipe the CD from the center out. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error. Noise is heard. Someone is using a portable telephone or other To cancel Shuffle Play equipment that emits radio waves near the unit. Move the portable telephone, etc. , away from the unit. cassette (available separately) after every 10 hours of use, before you start an important recording, or after playing an old tape. Failure to clean the tape heads can cause degraded sound quality or an inability of the unit to record or play tapes. For details, refer to the instructions of the cleaning cassette. The TYPE II (high position) or TYPE IV (metal) tape is being used. Demagnetize the heads using a commercially available tape head demagnetizer. Replace all the batteries with new ones if they are weak. Stop playing first. Then press MODE until "SHUF" disappears from the display. Tips During Shuffle Play, you cannot select the previous track/MP3 file by The AUDIO IN lid has been detached. 4 Press PRESET + or ­ on the unit until the preset number you want for the station flashes in the display. The new station replaces the old one. Reattach the lid as shown in the illustration below. (Reattach in order of and . ) Do not use solvents such as benzine, thinner, Remote The remote does not function. Replace all the batteries in the remote with new ones if Make sure that you are pointing the remote at the Remove any obstacles in the path of the remote and the Make sure the remote sensor is not exposed to strong Move closer to the unit when using the remote. pressing . The resume function does not work during Shuffle Play. 5 Press DSPL/ENT on the unit. On the remote To AUDIO IN jack they are weak. Total folder number Total file number Creating your own program (Program Play) You can arrange the playing order of up to 15 tracks/MP3 files on a CD. 1 Press RADIO/BAND until the band you want appears in the display. To check file information Press DSPL/ENT on the unit while playing an MP3 disc. [. . . ] Each time you press the button, the indication changes as follows: "AUTO*" "60MIN" "30MIN" "20MIN" "10MIN" "OFF". * When you select "AUTO", the CD or tape stops playing in 90 minutes at most and the unit goes off automatically. When you are listening to the radio, the radio goes off in 90 minutes. Notes Do not pull forcibly on the built-in audio cable . Doing so may Connect the built-in audio cable or audio connecting cable (not It is not possible to listen to two components connected at the same Press DSPL/ENT on the unit. Every time you press the button, the track number and the playing order appear. If 4 seconds have passed after you pressed SLEEP , the minutes in the display are entered. [. . . ]