User manual SONY CFD-G70L

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. The instructions in this manual are for the CFDG70 and CFD-G70L. Before you start reading, check your model number. the CFD-G70L is the model used for illustration purpose. [. . . ] You need to hold down the last number button to enter for about 2 seconds. (Example: To select 12, press >10 and 1 first, then hold down 2 for about 2 seconds. The stations are stored in memory from the lower frequencies to the higher ones. Once you've preset the stations, use PRESET + or ­ on the player or the number buttons on the remote to tune in to your favourite stations. On the remote 1 Press BAND until the band you want appears in the display. 2 Press the number button to tune in a stored station. To tune in a preset station over 10, press >10 first, then the corresponding number buttons. (Example: To tune in a preset station 12, press >10 and 1 first, and then press 2. You can adjust the audio emphasis of the sound you are listening to. You can also enjoy the live presence sound from a game machine, etc. When the POWER DRIVE WOOFER function works, the button lights up. To return to normal sound, press the button until the indication disappears from the display. While the sleeping timer is on, the POWER DRIVE WOOFER button does not light, even if the POWER DRIVE WOOFER function works. ⷠWhen using the headphones, the POWER DRIVE WOOFER function does not work. Choose To get powerful, clean sounds, emphasizing low and high range audio light, bright sounds, emphasizing high and middle range audio. The whole dynamic range for music such as classical music. When the GAME Xpand function works, the button lights up. To return to normal sound, press the button again to turn it off. Note When using the headphones, the GAME Xpand function does not work. Falling asleep to music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. To cancel the sleep function Press OPERATE (or POWER) to turn off the power. Note When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the end. [. . . ] ⷠReplace all the batteries with new ones if they are weak. ⷠMove the player away from the TV. ⷠIf you are using the remote while listening to AM (CFD-G70) or MW/LW (CFD-G70L) radio, noise may be heard. The picture of your TV becomes unstable. [. . . ]