User manual SONY CFD-S300

[. . . ] Precautions On safety · As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. · Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. · Discs with non-standard shapes (e. g. , heart, square, star) cannot be played on this player. [. . . ] · After playing, store the CD in its case. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error. Radio section Pinch roller Erase head Frequency range FM: 87. 5 - 108 MHz AM: Taiwan model: 531 - 1 611 kHz Other models: 530 - 1 710 kHz Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna WARNING CFD-S300 ©2004 Sony Corporation Printed in China The sound drops out. · Reduce the volume. · Clean the CD, or replace it if the CD is badly damaged. · Place the player in a location free from vibration. · Clean the lens with a commercially available blower. · The sound may drop out or noise may be heard when using poor quality CD-Rs/CDRWs or if there is a problem with the recording device or application software. Capstan Record/playback head Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the appliance. For customers in Canada To prevent electric shock, match wide blade of plug to wide slot, fully insert. Cassette-corder section Remote The remote does not function. · Replace all the batteries in the remote with new ones if they are weak. · Make sure that you are pointing the remote at the remote sensor on the player. · Remove any obstacles in the path of the remote and the player. · Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. · Move closer to the player when using the remote. After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer. About CD-Rs/CD-RWs This player can play CD-Rs/CD-RWs recorded in the CD-DA format*, but playback capability may vary depending on the quality of the disc and the condition of the recording device. * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. Recording system 4-track 2 channel stereo Fast winding time Approx. 120 s (sec. ) with Sony cassette C-60 Frequency response TYPE I (normal): 80 - 10 000 Hz 3-262-434-11 (1) Printed on 100% recycled paper using VOC (Volatile Organic Compound)free vegetable oil based ink. General Speaker Full range: 10 cm dia. , 3. 2 ohms, cone type (2) Outputs Headphones jack (stereo minijack) For 16 - 68 ohms impedance headphones Power output 2. 3 W + 2. 3 W (at 3. 2 ohms, 10% harmonic distortion) Power requirements For CD radio cassette-corder: 120V AC, 60 Hz 9 V DC, 6 size D (R20) batteries For remote control: 3 V DC, 2 size AAA (R03) batteries Power consumption AC 14 W Battery life For CD radio cassette-corder: FM recording Power Sources B C Radio Reception is poor. · Reorient the antenna to improve FM reception. Music discs encoded with copyright protection technologies This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. 1 to AC IN A Connect the AC power cord A or insert six size D (R20) batteries (not supplied) into the battery compartment B . Notes · Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replace all the batteries with new ones. [. . . ] You need to hold down the last number button to enter for about 2 seconds. (Example: To select 12, press >10 and 1 first, then hold down 2 for about 2 seconds. ) Using the display *The button has a tactile dot. Display MODE OPR/BATT Number buttons DISPLAY ENT MEMORY VOLUME ­, +* Remote sensor To check the total track number and playing time Press DISPLAY·ENT·MEMORY in stop mode (see fig. D). To check the remaining time Press DISPLAY·ENT·MEMORY repeatedly while playing a CD. [. . . ]