User manual SONY CFD-S35CP

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the appliance. connect the apparatus to an easily accessible AC outlet. [. . . ] 3 Hold down DISP/ENT/MEMORY for 2 seconds until the preset number flashes in the display. 4 Press PRESET + or ­ until the preset number you want for the station flashes in the display. On the remote 1 Press BAND until the band you want appears in the display. 3 Hold down the number buttons that you want to preset the new station on for about 2 seconds. To select the preset number over 10, press >10 first, then the corresponding number buttons. You need to hold down the last number button to enter for about 2 seconds. (Example: To select 12, press >10 and 1 first, then hold down 2 for about 2 seconds. ) Tip The preset radio stations remain in memory even if you unplug the mains lead or remove the batteries. The stations are stored in memory from the lower frequencies to the higher ones. Once you've preset the stations, use the number buttons to tune in your favorite stations. To tune in a preset station over 10, press >10 first, then corresponding number buttons. (Example: To tune in a preset station 12, press >10 and 1 first, and then press 2. You can adjust the audio emphasis of the sound you are listening to. Choose To get powerful, clean sounds, emphasizing low and high range audio light, bright sounds emphasizing high and middle range audio percussive sounds, emphasizing bass audio the presence of vocals, stressing middle range audio the whole dynamic range for music such as classical music To return to normal sound, press the button again. Falling asleep to music You can set the player to turn off automatically after 10, 20, 30, 60, 90 and 120 minutes, allowing you to fall asleep while listening to music. Note When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the end. " Press SLEEP to select the minutes until the player goes off automatically. Each time you press the button, the indication changes as follows: "60" t "90" t "120" t "OFF" t "10" t "20" t "30". If 4 seconds have passed after you pressed SLEEP, the minutes in the display are entered. When the preset time has passed, the player goes off automatically. To cancel the sleep function Press OPERATE (or POWER) to turn off the power. You can use the mains or batteries as a power source. [. . . ] Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. clean with a commercially available blower. Cleaning the tape heads and tape path Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality. To make the best possible recording, however, we recommend that you clean all surfaces over which tape travels before each recording. [. . . ]