User manual SONY CFD-V34

[. . . ] If you want to reuse the tape for recording, cover the broken tab with adhesive tape. Make sure the batteries are inserted correctly. ⷠReplace all the batteries with new ones if they are weak. ⷠYou cannot turn on the player with the remote when you operate the player on batteries. [. . . ] ⷠThe sound may drop out or noise may be heard when using poor quality CD-Rs/CDRWs or if there is a problem with the recording device or application software. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Replace all the batteries in the remote with new ones if they are weak. ⷠMake sure that you are pointing the remote at the remote sensor on the player. ⷠRemove any obstacles in the path of the remote and the player. ⷠMake sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. ⷠMove closer to the player when using the remote. After trying the above remedies, if you still have problems, unplug the mains lead and remove all the batteries. After all the indications in the display disappear, plug the mains lead and insert the batteries again. With the side you want to play facing upward AUTO PRESET (BAND on the remote) until the band you want appears in the display. Each time you press the button, the indication changes as follows: CFD-V34: "FM" t "AM" CFD-V34L: "FM" t "MW" t "LW". Hold down TUNE + or ­ until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by step. tip If the FM broadcast is noisy, press MODE repeatedly until "Mono" appears in the display and the radio will play in monaural. Press xZ M or m X Press the button again to resume play after pause. Press x u (X on the remote) Press the button again to resume play after pause. (backward) while playing until you find the point > (forward) or . (backward) in pause until you find the point a number button of the track on the remote To stop playback pause playback go to the next track go back to the previous track remove the CD locate a point while listening to the sound locate a point while observing the display locate a specific track directly* To record from the CD player Press x and load a CD (See "Playing a CD"). After changing the tuning interval, you need to reset your preset MW radio stations. [. . . ] Or > to select the track that you want to repeat, then press u. MEMORY for the tracks you want to programme in the order you want up to 20 tracks (see fig. MEMORY for the tracks you want to programme in the order you want up to 20 tracks. You can enjoy the sound from other components, such as TV, VCR and portable MD, CD player through the speakers of this player. [. . . ]