User manual SONY CFD-ZW155

[. . . ] This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Clean the heads, pinch roller and capstan with a cotton swab slightly moistened with cleaning fluid or alcohol. ⷠDemagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetizer. The CD does not play/ "­ ­" lights in the display even when a CD is in place. [. . . ] The tape does not move when you press an operation button. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The use of optical instruments with this product will increase eye hazard. The r button does not function/ The tape does not play. ⷠMake sure the safety tab on the cassette is in place. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. the FUNCTION selector is located at the front. When you turn on the player, the OPR/BATT indicator lights up. The model number is located at the bottom and the serial number is located in the battery compartment. In this case, remove the CD and wait about an hour for the moisture to evaporate. ⷠIf the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. ⷠDo not stick paper or sticker on the CD, nor scratch the surface of the CD. ⷠAfter playing, store the CD in its case. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error Using the player on batteries Insert six size D (R20) batteries (not supplied) into the battery compartment. To use the player on batteries, disconnect the AC power cord from the player. Tip Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player. [. . . ] If the received FM stereo is too weak, the reception becomes monaural. With the side you want to record on facing forward. With the side you want to play on facing upward. To record from the CD player, set FUNCTION to CD and insert a CD. [. . . ]