User manual SONY CFD-101

[. . . ] , heart, square, star) cannot be played on this player. If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. [. . . ] Before playing, clean the CD with a cleaning cloth. Clean the CD, or replace it if the CD is badly damaged. Place the player in a location free from vibration. Clean the lens with a commercially available blower. The sound may drop out or noise may be heard when using poor quality CD-Rs/CDRWs or if there is a problem with the recording device or application software. Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. Do not place the player on an inclined or unstable place. Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components. If the player is left in a car parked in the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun. Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the player to prevent possible damage from the magnet. The picture of your TV becomes unstable. If you are listening to an FM program near the TV with an indoor aerial, move the player away from the TV. With the side you want to play facing upward Con la cara que desee reproducir mirando hacia arriba Press x u (X on the remote) Press the button again to resume play after pause. (backward) while playing until you find the point > (forward) or . (backward) in pause until you find the point a number button of the track on the remote AUTO PRESET until the band you want appears in the display. Each time you press the button, the indication changes as follows: CFD-101: "FM" t "AM" CFD-EX35L: "FM" t "MW" t "LW". Hold down TUNE + or ­ until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by step. tip If the FM broadcast is noisy, press MODE until "Mono" appears in the display and the radio will play in monaural. Press xZ M or m X Press the button again to resume play after pause. [. . . ] For the best results, use the AC power as a power source for recording. To erase a recording, proceed as follows: 1 Insert a tape with the recording you want to erase. When POWER DRIVE WOOFER function works, the button lights up. To return to normal sound, press the button until the indication disappears from the display . [. . . ]