User manual SONY CFD-110

[. . . ] Note The name of the button to turn on/off this player is indicated as below: "OPERATE": CFD-G30L, CFD-110 "POWER": CFD-G30, CFD-G50 This Compact Disc player is classified as a CLASS 1 LASER product. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Notice for customers in the United Kingdom A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, same rating fuse approved by ASTA or BSI to BS 1362, (i. [. . . ] After you've created the programme, insert a blank tape and press z to start recording. MONO/ST until "PGM" disappears from the display. To check the order of tracks before play Press DISPLAY ENT· mEMORY. Every time you press the button, the track number appears in the programmed order. To change the current programme Press x once if the CD is stopped and twice if the CD is playing. Then create a new programme following the programming procedure. You can repeat part of a CD (LOOP) and can "flash" the CD sound (FLASH) during playback. To repeat a selected part of a CD "flash" the CD sound Press and hold LOOP FLASH You can store radio stations into the player's memory. You can preset up to 30 radio stations (CFD-G30/G50) or 40 Radio stations (CFD-G30L/ G50L), 10 for each band in any order. Tip If you automatically preset the "FM1" or "FM2" band, 10 radio stations are stored in "FM1" band and 10 more radio stations are stored in "FM2" band. AUTO PRESET until the band you want appears in the display. ⷠCFD-G50/G50L only: When you operate the player with the batteries, you cannot turn on the player with remote. Insert eight R20 (size D) batteries (not supplied) into the battery compartment. To use the player on batteries, disconnect the mains lead from the player. Replacing batteries Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones. You can enjoy the sound from a TV or VCR through the speakers of this player. Be sure to turn off the power of each component before making connections. After finishing the connections, turn on the player, and press LINE to display "LInE". As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. [. . . ] The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. remedy · Connect the mains lead to a wall outlet securely. ⷠMake sure the batteries are inserted correctly. ⷠYou cannot turn on the player with the remote when you operate the player on batteries (CFD-G50/G50L only). [. . . ]