User manual SONY CFD-120

[. . . ] ⷠReplace all the batteries with new ones if they are weak. Demagnetize the heads using a commercially available tape head demagnetizer. Someone is using a portable telephone or other equipment that emits radio waves near the player. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] ⷠThe player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion. This Compact Disc player is classified as a CLASS 1 LASER product. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the appliance. the FUNCTION selector is located at the front. When you turn on the player, the OPR/BATT indicator lights up. Clean the CD, or replace it if the CD is badly damaged. ⷠPlace the player in a location free from vibration. ⷠClean the lens with a commercially available blower. ⷠThe sound may drop out or noise may be heard when using poor quality CD-Rs/CDRWs or if there is a problem with the recording device or application software. Be sure to set the VOLTAGE SELECTOR (at the bottom) to your local power supply. tip Only for the customers supplied with an AC plug adaptor: Use the supplied AC plug adaptor if the plug of the main lead does not match your outlet. Batteries) Supplied accessory Mains lead (1) Design and specifications are subject to change without notice. With the side you want to play facing upward Con la cara que desee reproducir hacia arriba Press xZ M or m X Press the button again to resume play after pause. Press x u Press the button again to resume play after pause. (backward) while playing until you find the point. Go back to the previous track remove the CD locate a point while listening to the sound To record from the CD player Set FUNCTION to CD and insert a CD. To record from the radio Set FUNCTION to FM or AM/LW and tune in the station you want. Select "REP 1" "REP" Then do this Select the track you want to repeat by pressing > or . To repeat a single track repeat all the track shuffle play repeat tracks in random order programme play To record from the CD player Press z and then u to start recording. Then press ENTER for the tracks you want to programme in the order you want up to 20 tracks (see fig. [. . . ] After you've created the programme, insert a blank tape and press z and then u to start recording. CFD-120 only: If the LW programme makes a whistling sound after you've pressed z in step 3, set FM MODE· For the best results, use the AC power as a power source for recording. ⷠTo erase a recording, proceed as follows: 1 Insert a tape with the recording you want to erase. To return to normal sound, press the button to 4OFF. [. . . ]