User manual SONY CFD-44

[. . . ] The FUNCTION selector is located at the front. When you turn on the player, the OPR/BATT indicator lights up. 2 Introduction Table of contents Basic Operations Basic Operations 4 6 8 Playing a CD Listening to the radio Playing a tape 10 Recording on a tape 12 Dubbing The CD Player 14 Using the display 15 Locating a specific track 16 Playing tracks repeatedly (Repeat Play) 17 Creating your own program (Program Play) Setting Up 20 Hooking up the system 23 Connecting optional components 24 Adjusting the audio emphasis (DYNAMIC SOUND SYSTEM) Additional Information The Tape Player 19 Recording through a microphone/Using as a PA system 25 Precautions 27 Troubleshooting 29 Maintenance 30 Specifications Back cover Index Introduction 3 Basic Operations Playing a CD 1 2, 3 4 For hookup instructions, see pages 20 ­ 22. 1 FUNCTION CD TV/ LINE IN RADIO DUBBING TAPE CD/RADIO OFF Set FUNCTION to CD. 2 Press 6 PUSH OPEN/CLOSE down to open the lid of the CD compartment and place a CD on the CD compartment. With the label side up 3 Close the lid of the CD compartment. 4 BasicOperations 4 Press ^ (( on the remote). The player plays all the tracks once. Display Basic Operations Track number Playing time Use these buttons for additional operations FUNCTION =, + VOLUME ^ 6 PUSH OPEN/CLOSE p Level meter Tip During operation, the level meter shows the frequency level of the sound. Adjusting the volume will not affect the level meter. To adjust the volume stopplayback pauseplayback Do this Turn VOLUME. [. . . ] When you release LOOP, the player returns to normal play. 1 2 Set FUNCTION to CD on the player. Press MODE (PLAY MODE on the player) until the repeat mode you want appears in the display. To repeat a single track allthetracks tracks in random order programed tracks Select REP 1 REP ALL SHUF REP PGM REP 3 Do either of the following to start repeat play: · When you've selected REP1, select the track by pressing the number button (pressing = or + then ^ on the player). · When you've selected REP ALL or SHUF REP, press ( (^ on the player). · When you've selected PGM REP, program tracks (see step 3 on page 17), then press ( (^ on the player). To cancel Repeat Play Press MODE until "REP" disappears from the display. 16 The CD Player Creating your own program (Program Play) The CD Player Number buttons MODE DISPLAY ( You can arrange the playing order of up to 20 tracks on a CD. On the player 1 Set FUNCTION to CD. 2 Press PLAY MODE until "PGM" appears in the display. 3 Press = or + then press DISPLAY/ENTER for the tracks you want to program in the order you want. 4 Press ^. 1 2 3 Set FUNCTION to CD on the player. Press MODE until "PGM" appears in the display. Press the number buttons for the tracks you want to program in the order you want. Playing order Programed track 4 Press ( to start program play. continued The CD Player 17 Creating your own program (Program Play) (continued) Tips · You can play the same program again, since the program is saved until you open the CD compartment or switch FUNCTION. · The current program will be erased if you switch FUNCTION or open the CD compartment. · You can record your own program. On placement · Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. · Do not place the player on an inclined or unstable place. · Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components. · If the player is left in a car parked in the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun. · Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or springwound watches away from the player to prevent possible damage from the magnet. On operation · If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. · If the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. continued Additional Information 25 Precautions (continued) Notes on CDs · Before playing, clean the CD with a cleaning cloth. [. . . ] The CD does not play. The sound drops out. The audio is weak or has poor quality. The picture of your TV becomes unstable. continued Additional Information 27 Troubleshooting (continued) Symptom The tape does not move when you press an operation button. The REC r button does not function/The tape does not play. Remedy · Close the tape compartment securely. · Make sure the safety tab on the cassette is in place. · Make sure FUNCTION is set to "TAPE" or "DUBBING". [. . . ]