User manual SONY CFD-530

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. [. . . ] To change the current program Press p once if the CD is stopped and twice if the CD is playing. Then create a new program following the programing procedure. The CD Player 17 The CD Player Enjoying sound effects (LOOP/FLASH) You can repeat part of a CD (LOOP) and can "flash" the CD sound (FLASH) during playback. LOOP AUTO PRESET FLASH 1 2 Play a CD. Press and hold LOOP·AUTO PRESET or FLASH at the point you want to start the function. To repeat a selected part of a CD "flash" the CD sound Press and hold LOOP· AUTO PRESET FLASH To cancel the LOOP or FLASH function Release the button. The player returns to normal play. 18 The CD Player The Radio Presetting radio stations You can store radio stations into the player's memory. You can preset up to 20 radio stations, 10 for each band in any order. RADIO BAND DISPLAY ENT MEMORY LOOP AUTO PRESET PRESET +, ­ The Radio 1 2 Press RADIO BAND until the band you want appears in the display. Hold down LOOP·AUTO PRESET for 2 seconds until "AUTO" appears in the display. The stations are stored in memory from the lower frequencies to the higher ones. On the remote (CFD-530 only) 1 Press BAND until the band you want appears in the display. 3 Hold down the number buttons that you want to preset the new station on for about 2 seconds. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 3 Hold down DISPLAY ENT·MEMORY for about 2 seconds. 4 Press PRESET + or ­ until the preset number (1 to 10) you want for the station flashes in the music calender. The new station replaces the old one. The Radio 19 Playing preset radio stations Once you've preset the stations, use the number buttons on the remote or PRESET +/­ on the player to tune in to your favorite stations. RADIO BAND PRESET +, ­ On the remote (CFD-530 only) 1 Press BAND to select the band. · Unplug the player from the wall outlet when it is not to be used for an extended period of time. · For battery operation, use six size D (R20) batteries. · When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion. · The nameplate indicating operating voltage, power consumption, etc. On placement · Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. · Do not place the player on an inclined or unstable place. · Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components. · If the player is left in a car parked in the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun. · Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or springwound watches away from the player to prevent possible damage from the magnet. On operation · If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. [. . . ] Record on TYPE I (normal) tape and play. · Make sure the tape is inserted properly. · Make sure the safety tab of the cassette is in place. The audio is weak/The audio quality is poor. [. . . ]