User manual SONY CFM-10

[. . . ] Notice for customers in the United Kingdom A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a same rating fuse approved by ASTA or BSI to BS 1362, (i. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. IMPORTANT If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions. The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Do not connect either wire to the earth terminal in the plug which is marked by the letter E or by the safety earth symbol Y or coloured green or green and yellow. WARNING To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. This plug cannot be used and should be destroyed. Note For critical recordings, operating the player on AC power is recommended. Be sure to set VOLTAGE SELECTOR (at the rear) to your local power supply. For customers supplied with an AC plug adaptor Use it if the plug of the mains lead does not match your mains. The player cannot be operated on batteries when the mains lead is connected to the player. ⷠWhen the OPR/BATT indicator glows faintly, replace all the batteries with new ones. When the player is in use The OPR/BATT (operation/ battery) indicator lights. 1­b To record from the builtin microphone, set FUNCTION to TAPE/ RADIO OFF, and sing or speak into the built-in microphone. While recording from the built-in microphone You cannot monitor the sound through the earphone. [. . . ] 1­b To record from the builtin microphone, set FUNCTION to TAPE/ RADIO OFF, and sing or speak into the built-in microphone. While recording from the built-in microphone You cannot monitor the sound through the earphone. The recording level is adjusted automatically Adjusting the VOLUME will not affect the recording level. [. . . ]