User manual SONY CFM-10L

[. . . ] 9 W Output Earphone jack, 32 ohms impedance Power requirements European model 220­230 V AC, 50 Hz United Kingdom model 230­240 V AC, 50 Hz Other models 110­120 V/220­240 V AC selectable, 50/60 Hz 6 V DC, four R20 (size D) batteries Power consumption 5 W AC operation Battery life Before operating the player, please read this manual thoroughly and retain it for future reference. To prevent fire or shock hazard, do not expose the player to rain or moisture. [. . . ] The player is not disconnected from the AC power source (mains) as long as it is connected to the mains, even if the player itself has been turned off. ⷠWhen the batteries are not to be used for a long time, remove them to avoid damage that can be caused by battery leakage or corrosion. The caution label is located at the bottom (UK model only). handling the player · Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. ⷠShould any solid object or liquid fall into the player, unplug the player and have it checked by qualified personnel before operating it any further. ⷠDo not lift the handle when the telescopic aerial is extended. ⷠIf the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette. Note on cassette The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Someone is using a portable telephone or other equipment that emits radio waves near the player. Use another cassette or cover the broken tab with adhesive tape. Clean the illustrated portions with a cleaning tip slightly moistened with cleaning fluid or alcohol (see Fig. [. . . ] B) Break off the cassette tabs from side A and/or B. To reuse the tape for recording, cover the tab hole with adhesive tape. [. . . ]