User manual SONY CFS-515S

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the appliance. [. . . ] To use the player on AC power source (mains) When adjusting the 5 BAND GRAPHIC EQUALIZER, be sure to set the PRESET MODE to MANUAL. The graphic equalizer will not work in any other position. To adjust the sound balance of the right and left speakers. Projecting parts and controls, not incl. Supplied accessory AC power cord (1) Design and specifications are subject to change without notice. To use the player on batteries Make sure the safety tab on the cassette is in place. Be sure to set the VOLTAGE SELECTOR (at the rear) to your local power supply. Clean the unit (as shown) with a cotton swab slightly moistened with cleaning fluid or alcohol. â· Demagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetizer. For customers supplied with an AC plug adaptor, use it if the plug of the mains lead does not match your mains. To use the player on batteries, disconnect the mains lead from the player. â· Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. To record from the radio Tune to the station you want. With the side you want to record facing you. [. . . ] * CFS-515S only **CFS-515L only For best results, use the AC power source. â· Do not set the FUNCTION during dubbing as this causes excessive wow and flutter. When the tape in deck A ends first, deck B will also stop recording. [. . . ]