User manual SONY CHC-CL5MD

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. The following caution label is located inside the unit. [. . . ] This may prevent recording data from being recorded properly. Repeatedly changing the recording level results in poor sound quality. The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level. The recording level cannot be changed while the timer is activated. To tune in a station with a weak signal The frequency indication changes and the scanning stops when the system tunes in a station. To set another station to an existing preset number After step 5, turn . Or > on the remote) to select the preset number you want to store the other station. The stations are stored from preset number 1. To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding STEREO/MONO, turn the system back on. When you change the interval, all the AM preset stations are erased. The preset stations are retained for about a day even if you disconnect the mains lead or if a power failure occurs. When an FM stereo programme has static noise, press STEREO/MONO repeatedly until "MONO" appears. * The station name appears only if you have labelled the station (see "Labelling the preset stations" on the next page). The display changes cyclically as follows: Frequency with station name* t Clock display t Effect name * The station name appears when you label the preset station (see "Labelling the preset stations" on the next page) or the RDS broadcast is received (see "Using the Radio Data System (RDS)" on the next page). Press and hold m or M until "AUTO" appears in step 2. The frequency indication changes and the scanning stops when the system tunes in a station (Automatic Tuning). You can label each preset station with up to 12 characters (Station Name). RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Simply select a station from the FM band. [. . . ] CRemove the MD once, then insert it again. There is no disc in the MD deck, or the MD is protected against erasure. You attempted to perform another operation while in S. You tried to make an impossible editing operation. [. . . ]