User manual SONY CHC-TB20

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Or > on the remote to set the hour, then press ENTER/YES. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit). Insert a tape with the side you want to record on facing up. You cannot use Tape Select Edit for discs containing over 20 tracks. You can listen to music with more powerful sound. The system automatically turned on about 30 seconds before the preset time. Do not operate the system until the recording starts. â· If the system is on about 30 seconds before the preset time, the timer-recording will not be activated. "GROOVE" appears in the display and the volume switches to power mode (DBFB is also turned on). You can listen to music with stronger bass tones. The audio emphasis menu lets you select the sound characteristics according to the sound you are listening to. You can adjust the sound by raising or lowering the levels of specific frequency ranges, then store the personal file (P FILE) in the memory. Select the audio emphasis you want for your basic sound first. "LOW" appears and you can adjust the low frequency band. "SURROUND" appears if you select an effect with surround effects. When you store a new setting, the previous setting will be canceled. Falling asleep to music -- Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 8). 1 Prepare the sound source you want to Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90min t 80min t . t 10min t OFF * The system automatically turns off after the current CD or tape finishes playing (up to 100 minutes). When the function is TUNER, the system turns off after 100 minutes. [. . . ] This speaker system is not magnetically shielded and the picture on TV sets may become magnetically distorted. In such a case, turn off the power of the TV set once, and after 15 to 30 minutes turn it on again. If there seems to be no improvement, locate the speaker system further away from the TV set. Also, be sure not to place objects in which magnets are attached or used near the speaker system, such as audio racks, TV stands, and toys. [. . . ]