User manual SONY CKH-NWZE430

[. . . ] With your Handycam Vision, you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the Customers in the U. S. A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER·SERVICEABLE PARTS INSIDE. [. . . ] If you connect the red plug, the sound is R (right) signal. 50 Watching on a TV screen Using the AV cordless IR receiver LASER LINK Once you connect the AV cordless IR receiver (not supplied) having the LASER LINK mark to your TV or VCR, you can easily view the picture on your TV. For details, refer to the operating instruction of the AV cordless IR receiver. LASER LINK is a system which transmits and receives a picture and sound between video equipment having the mark by using infrared rays. LASER LINK is a trademark of Sony Corporation. To play back on a TV (1) Set the POWER switch on the camcorder to VTR. (2) After connecting your TV and AV cordless IR receiver, set the POWER switch on the AV cordless IR receiver to ON. (3) Turn the TV on the TV/VCR selector on the TV to VCR. The lamp of the LASER LINK button is flashing. (5) Press · on the camcorder to start playback. (6) Adjust the angle and direction of both the camcorder and AV cordless IR receiver. To cancel the LASER LINK function Press LASER LINK. (2) Press MENU to display the menu on the LCD screen. (3) Turn the CONTROL dial to select CM SEARCH, then press the CONTROL dial. (4) Turn the CONTROL dial to select OFF, then press the CONTROL dial. (5) Press SEARCH MODE on the Remote Commander repeatedly, until the date search indicator appears. (6) When the current position is [b], press = to search towards [a] or press + to search towards [c]. Each time you press = or +, the camcorder searches for the previous or next date. Playback starts automatically when date changed. JUL. 4. 1998 JUL. 5. 1998 DEC. 31. 1998 [a] [b] [c] 5 DATE SEARCH 1 O POWER V CA TR ME FF R A 6 2, 3, 4 MENU CONTROL CONTROL MENU CM SEARCH ON OFF To stop searching Press p. 54 Searching the boundaries of recorded tape with title ­ title search You can search for the boundaries of recorded tape with title ­ Title Search function. If you use a tape with cassette memory, you can select the title displayed on the LCD screen or in the viewfinder. You can only operate with the Remote Commander. Searching for the title by using cassette memory You can use this function only when playing back a tape with cassette memory (p. 67). Advanced operations (1) Set the POWER switch to VTR. (2) Press MENU to display the menu on the LCD screen. (3) Turn the CONTROL dial to select CM SEARCH, then press the CONTROL dial. [. . . ] 56 Photo search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Playback on a TV . . . . . . . . . . . . . . . . . . . . . . . 50 Playback pause . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Power sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]