User manual SONY CKL-PCMD50

[. . . ] Press: Turns the screen on/off. About volume operation (Only for countries/areas complying with European Directives) An alarm (beep)* and warning [Check the volume level] are meant to protect your ears when you raise the volume setting beyond a specific level for the first time. You can cancel the alarm and warning by tapping [OK] button on the alert dialog. * The alarm (beep) does not sound when connecting a Bluetooth audio device. 6 Select the desired language. 7 Tap  to begin using your Walkman.  Hint  When you execute [Setup. exe], the [Setup. exe] file stored in the [WALKMAN] folder of your Walkman is copied to your computer for backup, and the WALKMAN Guide and Media Go are installed to your computer.  If you changed the type of USB connection to a setting other than MSC mode, change mode back to MSC mode again by tapping [Connected as USB Storage] on the notification panel. [. . . ] 8 Set the Wi-Fi connection, Google account and  Hint  Wi-Fi connection and Google account can also be set afterwards. Note  You can turn up the volume beyond the specific level after canceling the alarm and warning.  After the initial warning, the alarm and warning repeat for every 20 cumulative hours that the volume is set beyond the specific level; when this happens, the volume is changed to the initial setting automatically.  If the volume is set beyond the specific level and you turn off your Walkman, the volume returns to the specific level automatically. After the install wizard finishes, the  (WALKMAN Guide) icon appears on the desktop of your computer. You can view the Help guide by double-clicking the  (WALKMAN Guide) icon and clicking on the Help guide. You can transfer content stored on your computer to your Walkman. For details on transferring music, etc. , refer to the Help guide. About Windows Operating System Make sure that the OS is Windows XP (Service Pack 3 or later), Windows Vista* (Service Pack 2 or later) or Windows 7* (Service Pack 1 or later). * [Compatibility mode] for Windows XP is not supported.  Hint  You can start the WALKMAN Guide and Media Go from the [Start] menu (displayed by clicking [Start]).  You can install the supplied software on another computer through the following procedure even if you delete the [Setup. exe] file by formatting the built-in flash memory of your Walkman. Copy the [Setup. exe] file and the [Install] folder from the [Backup] folder of your computer to the Walkman. Then, connect the Walkman to another computer on which you want to install the software and follow the above procedure from step 2. The [Backup] folder can be found at C:\Program Files\Sony\WALKMAN Guide\NWZ-F800\Backup ([Program Files(x86)] may be displayed depending on the computer OS. ) date/time, etc. , following the instructions shown on the screen. Turning On/Off Your “WALKMAN” Hold down. Home Screen The Home screen is displayed by tapping the  (Home) button. Troubleshooting If your Walkman does not function as expected, try the following steps to resolve the issue. Precautions To initialize (format) your “WALKMAN” You can format the built-in flash memory of your Walkman. If the memory is formatted, your data will be erased and all setting values will return to their defaults. Note About the headphones 1 Find the symptoms of the issue in “Troubleshooting” in the Help guide (HTML document), and try any corrective actions listed. For details on connecting to a computer, see the table below.  Avoid playing the unit at so loud a volume that extended play might affect your hearing. Connect the Walkman directly to the computer’s USB port.  The USB connector on your computer may have a problem.  Connect your Walkman to another USB connector on your computer.  When you use your Walkman for the first time, or when the battery is low, the battery symbol may display and you may not be able to use the Walkman. Wait for about 10 minutes before attempting operations.  Software authentication may take some time.  Reinstall the software using the installer.  If the problem still persists after performing the remedies above, press the RESET button to reset your Walkman. Your Walkman becomes  A USB hub or USB extension cable is being used. unstable while it is  Your Walkman may be unstable if using a USB hub connected to the or USB extension cable. directly to the computer’s USB port. Your Walkman gets  Your Walkman may become warm when the battery warm. [. . . ] Your Walkman gets  Your Walkman may become warm when the battery warm. is being charged and just after charging. The Walkman also may get warm temporarily when a large amount of data is transferred. Set the Walkman aside for a while to allow it to cool down. For customer support websites, see “For the latest information. ” (Menu) button, and tap [System settings] [  Backup & reset] - [Factory data reset] [Reset device]. Tap and check [Erase USB storage] to delete transferred music, videos and photos. [. . . ]